MAZDASPEED BOV list

[Swerny]

Threadjack,
Trying to get my SSQV installed (dual) for my Ion kit.
What size is the Brake booster line ID.
I need to get a T for it.
The super turkey is driving me nuts.
Thanks.

 

[505zoom]

What size is the Brake booster line ID.

3/8"

 

[Swerny]

Gracias 505zoom.
So how the hell do i get a hose to fit 3/8 at one end as well as the tiny nipple on the SSQV?

 

[505zoom]

Gracias 505zoom.
So how the hell do i get a hose to fit 3/8 at one end as well as the tiny nipple on the SSQV?

Go to autozone, and get a package that has a variety of sized T's. They will have one in there that has 2 3/8" ends, and 1 3/16" end. Put the 2 larger ends on the BB line, and then hook up a hose that goes to your SSQV the the 3/16" end.

 

[ChopstickHero]

Go to autozone, and get a package that has a variety of sized T's. They will have one in there that has 2 3/8" ends, and 1 3/16" end. Put the 2 larger ends on the BB line, and then hook up a hose that goes to your SSQV the the 3/16" end.

thanks... i needed to find this out for future use...

 

[505zoom]

No problem fellas.

 

[Swerny]

Thanks again 505Zoom.
Too bad there isn't an Autozone in Toronto.
I'll try my local parts stores but I didn't realize you could get a T with 2 different-sized ends.

 

[Wiggles422]

this pic was posted a while ago in a thread, whose ever pic it is thanks for letting me borrow it.
this is supposedly (i say that b/c i havent tried them yet) the box you need

 

[505zoom]

this pic was posted a while ago in a thread, whose ever pic it is thanks for letting me borrow it.
this is supposedly (i say that b/c i havent tried them yet) the box you need

Yup, that is the one.

 

[StreakinOraNgeX]

I want to make a list of the MAZDASPEED owners that are running aftermarket BOV's and how they are each set up. This will help members that want to run a certain BOV get in touch with the right people for help/questions. I would also like to see how many of you are running the dual valve solution.

Please post:
1) type of valve (brand/model)
2) open-vent, recirculated, or dual (if dual, specify type of BPV)
3) Stalling? Y/N (if your car drops below idle level and then bounces up, put Y)
4) Surging (turkey) Y/N
5) Type of Intake
6) Sound clip (if possible)

Example for me:

1) HKS SSQV
2) dual w/ BoostSciences Reflex BPV
3) No stall
4) No surge
5) Injen SRI
6) http://www.mazdamp3.com/members/505zoom/mov00533.mpg

MEMBERS RUNNING BOV/BPV SETUP:

1) 505zoom
2) DiscreetSpeed
3) bored132
4) mazdaspeed75
5) hawaiian_msp
6) Mach 3.5 Turbo (stock IC piping)
7) GotBoost_02 (stock IC piping)
8) bOOsted
9) mspeed101
10) kicker22705
11) Notorious
12) speedmo21
13) MOnk
14) LAZERBLU2003.5

1.Greddy type s on hardpipes.
2. Dual set-up with stock bpv.
3. Yes, considering that it bounces very very low almost 80 percent of the time, and stutters the car a few times a month.
4. Some surge at low rpms and when i let of throttle quickly, otherwise, If I let off slowly I can just make bov sound.
5. Injen intake

 

[Concept MSP]

1) TurboXS H-34
2) Recirculated
3) Stalling? No
4) Surging (turkey) Yes
5) Injen Intake

 

[poboxjosh]

Those running dual with stocker are you keeping stocker on the Ic->tb side or from other side.

 

[hoindawall]

Those running dual with stocker are you keeping stocker on the Ic->tb side or from other side.

mines is stock location, hot pipe --> intake

 

[Blaznmsp]

1.Greddy type s
2.dual set up-stock bpv
3.no stalling at all
4.only in 2 and 3rd gear with low rpm shifts.
5.injen cold air intake
6. sry no sound clips.

 

[MyOrangeToy]

1) HKS SSQV
2) open-vent
3) Yes (Only when I m diving and shift to N and let off the gas padel)
4) Surging ( Yes)
5) Injen CAI