Santa is comin Early.....AFC GB....

Status
Not open for further replies.
Harness

I think I did it... not a bad litlle post, ask as many questions as u want, I just threw the description together quickly. Also, the pic.s should go right along with the description. So, follow description to pic. to next sentence to next pic. etc. Also, tell me if the pic.s don`t work. I used `em then moved `em on my computer, I don`t know if I can do that.


sickspeed94 said:
or you can just upload them... (reply to the post and scroll down and click manage attachments, then find the pic and click upload)
Click to expand...
 
Last edited:
You don't have to make a harness if you don't want to right? I was planning on just soldering the wires and covering with black tape.

Also, DSM, I had asked another question, I was wondering how I would connect a WB if I choose to buy one later and was wondering if I did use the WB, would the AFC use it during normal driving or ONLY during data logging. One member had respoonded earlier and explained that it is only during data logging, but I sisn't get an answer about how it would wire into the AFC. THere seems to be different options out there for which WB and different ones supply different types of outputs for datalogging. THanks!
 
Last edited:
No, don`t need a harness. I`m just gonna be cooler than you, that`s all... ha. J/K!

genius said:
You don't have to make a harness if you don't want to right? I was planning on just soldering the wires and covering with black tape.

Also, DSM, I had asked another question, I was wondering how I would connect a WB if I choose to buy one later and was wondering if I did use the WB, would the AFC use it during normal driving or ONLY during data logging. One member had respoonded earlier and explained that it is only during data logging, but I sisn't get an answer about how it would wire into the AFC. THere seems to be different options out there for which WB and different ones supply different types of outputs for datalogging. THanks!
Click to expand...
 
Last edited:
Ok planning on having everything ready to ship on Thursday so here is the info that make sure everyone is on the same page. The following list of people are all paid:
Sander H., Bradley Y., Kevin L., Mathieu C., Dominic L., Eric B., Emily A., Bob O., Colin T., Kelly M., Fred S., Giancarlo C., Guilluame(not paid but included due to my mess-up). Ok now the list of people with shipping adjustments:
Dominic - Yours is being sent to Morpheus(Guilluame)
Eric - Yours is going to your work addy
Bob - We need to talk before I ship yours to a generic addy
Kelly - Yours is now going to your new addy Eglin, FL
Mathieu - Yours is going to Morpheus for a border hop

If anyone has any changes or corrections please let me know by tomorrow evening at the latest! If your name is NOT on the list and you feel it should be please let me know asap. I went on vacation and then my tech went the next week so it is possible things were jossled in the coming and going, however our server saves EVERY email message so if you sent me your info and I missed it I will still honor the GB price.

Ok on the wb note, yes SS products are able to log the signal, however, I will have to check to see if the msp version of the afc has that option built in.
 
Last edited:
DSMConvert said:
The following list of people are all paid:
Sander H., Bradley Y., Kevin L., Mathieu C., Dominic L., Eric B., Emily A., Bob O., Colin T., Kelly M., Fred S., Giancarlo C., Guilluame(not paid but included due to my mess-up).
Click to expand...
Payment sent this morning after reading your PM (thumb)
DSMConvert said:
Ok now the list of people with shipping adjustments:
Dominic - Yours is being sent to Morpheus
Eric - Yours is going to your work addy
Bob - We need to talk before I ship yours to a generic addy
Kelly - Yours is now going to your new addy Eglin, FL
Mathieu - Yours is going to Morpheus for a border hop
Click to expand...
I also think Kevin's one is going to be ship to me too? I'll try to talk to him ASAP, probably tonight as he don't have acces to a computer from work...
 
Last edited:
DSMConvert is this the right version of the AFC for the msp?
PSC1-002E Prog. Sig. Cal. w/2-bar MAP and ESC
 
Kevin/Morph DHL is coming by at 11am tomorrow so I'll check this site one last time at 10am to see if kevin's is going to TX, if I dont hear anything its going to Canada.
 
Hey thanks. It`s Ram Industries, 610 Lanark - suite 203A, San Antonio TX 78218 just to double check. tell airflowtech i said thanks too.

DSMConvert said:
Ok planning on having everything ready to ship on Thursday so here is the info that make sure everyone is on the same page. The following list of people are all paid:
Sander H., Bradley Y., Kevin L., Mathieu C., Dominic L., Eric B., Emily A., Bob O., Colin T., Kelly M., Fred S., Giancarlo C., Guilluame(not paid but included due to my mess-up). Ok now the list of people with shipping adjustments:
Dominic - Yours is being sent to Morpheus(Guilluame)
Eric - Yours is going to your work addy
Bob - We need to talk before I ship yours to a generic addy
Kelly - Yours is now going to your new addy Eglin, FL
Mathieu - Yours is going to Morpheus for a border hop

If anyone has any changes or corrections please let me know by tomorrow evening at the latest! If your name is NOT on the list and you feel it should be please let me know asap. I went on vacation and then my tech went the next week so it is possible things were jossled in the coming and going, however our server saves EVERY email message so if you sent me your info and I missed it I will still honor the GB price.

Ok on the wb note, yes SS products are able to log the signal, however, I will have to check to see if the msp version of the afc has that option built in.
Click to expand...
 
Last edited:
DSMConvert said:
Kevin/Morph DHL is coming by at 11am tomorrow so I'll check this site one last time at 10am to see if kevin's is going to TX, if I dont hear anything its going to Canada.
Click to expand...

I'm 99% sure he wants to ship it to Houston, he is the first one I talk to about this opporunity because we are both from the same town (15 mins ride from my plac to his). I haven't been able to talk to him yesterday evening, so my guess is that he didn't even came on the forum this year (2006) yet...

Packaged his in the same box to Houston with mine and the other 2, I'll handle the rest with Kevin!
 
Cusson said:
Do we need to mention if our Ecu was flashed....? Because mine is.
Click to expand...
From what I read about it it won't change anything if you're flashed or not. The only thing different will be the timing wich will be more advanced if you got the reflash.
 
I THINK the FAQs at the airflowlogistics.com website does say to specify flashed or unflashed. However, I`m not sure how major of a deal it is. I told John and AirFlowTech I was unflashed and he just said, "OK."

Cusson said:
Do we need to mention if our Ecu was flashed....? Because mine is.
Click to expand...
 
Status
Not open for further replies.

New Posts and Comments

I
Hard wear on edge of tire
Replies
6
Views
130
docKiwi75
D
X
  • Question Question
About to get a Mazda Portege 5!
Replies
0
Views
34
Xavjr._
X
M
    • Like
  • Question Question
Aftermarket Headunit Options that do it all?
Replies
9
Views
1K
kpoon
K
K
ATOTO A6PF 7" Android Double DIN Head Unit with Backup Camera Installed
Replies
0
Views
52
kpoon
K
T
  • Article Article
For Sale (Unverified) 2024 CX-5 CorkSport Intake and RaceChip TTS
Replies
2
Views
645
3eight0
3
TBarney
    • Like
Guide Add paddle shifters to Gen 2 (2017 KF) CX-5 with heated steering wheel. "Easy"
2
Replies
38
Views
21K
Terrypham
T
View more…

New Threads and Articles

Back