Mazda Protege Keyless Entry Remotes & progamming instructions

[VIPMSP]

lol @ super old thread... but i did this about a month ago and it worked for me as well... maybe sticky this? very useful information.

asked the dealership how much it would cost them to do it... they told me $70!!!!!!

 

[hornsfan10609]

I have tried this for a week now and it WON'T work. I can't figure out what i'm doing wrong.

 

[habu87]

I just had to do this. I have a TT installed (and the two wires cut to arm the alarm while the timer runs). The car refused to go into programming mode until I reconnected the blue wire at the keyless module under the rear deck. Thought I'd share in case someone out there still runs the stock alarm...

 

[hornsfan10609]

I just had to do this. I have a TT installed (and the two wires cut to arm the alarm while the timer runs). The car refused to go into programming mode until I reconnected the blue wire at the keyless module under the rear deck. Thought I'd share in case someone out there still runs the stock alarm...

Thanks for helping me figure out why I can't program mine, I knew the turbo timer may have had something to do with it.

 

[SCMP3]

pics of the wires? my car came with a tt and ive never been able to program my remote

 

[hornsfan10609]

I dont have any pics but just fold down the back seats, remove the clips for the rear deck and pull up on it and there is a white box with a harness plugged into it. There is blue wire with i believe a white or silver stripe that i had to reconnect, this wire lets you lock the car when its running. I like having working remotes now.

 

[SCMP3]

Ill have to check it out when I get the car back together.

 

[Speed3.5]

Does anyone have schematic of the stock MSP alarm system , would like to get it uninstalled and install new aftermarket , just in case so it won't interfere with new alarm.

 

[1326]

I bought a 2003 mazdaspeed protege, no key fob with it when i got it, tried the instruction on programing and it worked. so how do i find out what number i need on the key fob?

 

[hornsfan10609]

What do you mean what number on the key fob? You said you programmed the key fob and it worked?

 

[1326]

I tried the programing, I have no fob, just made sure I could do it. Is there a certain number I need for the my car? On the fob that is.

 

[Cleverfrog]

when I press a button on my fob the cars lights show it's working but, the doors don't lock or unlock. Anybody have a wiring diagram so I can fix this issue?

 

[hornsfan10609]

I tried the programing, I have no fob, just made sure I could do it. Is there a certain number I need for the my car? On the fob that is.

No any remote can be programmed.

 

[SCMP3]

heres what im working with

what needs to be changed

 

[hornsfan10609]

If the circled wire is cut, reconnect it to the other end of the wire.

 

[SCMP3]

wait maybe im retarded. where is the other end?

 

[SCMP3]

so that wire isnt cut.....

 

[manny122]

you can look it up on you tube

 

[hornsfan10609]

so that wire isnt cut.....

Trace it as far as you can to make sure, then check the orange wire in the alarm harness under the dash.

 

[cbea1124]

i followed the directions and sequence was easy...my passenger side doors respond to remote perfectly.
BUT.........
My Driver's side doors DO NOT...when i hit door locks on drivers side i get grinidning noise....the drivers back seat goes down when it wants to but most of time i have to open/lock myself by reaching over.

Also the hatchback only unlocks with key or if i hit unlock on drivers side button.

Any remedies?