CorkSport downpipes

[Paul]

I don't see why it wouldn't

 

[lcruz64]

Do we get a discount if both the down pipe and exhaust are bought at the same time?

 

[RXMmazdaspeed]

ill be installing the DP along with the CS exhaust not this weekend but the following. anyone have any hints or tips for me. so far i know about the exhaust hangers and how they need to be bent. any tips for installing the downpipe? any specific tools for the hard to reach bolts? thanks.

 

[slug420]

yep....you will need tiny hands and a open ended box wrench where the end of it is bent off to the side. If bestbuy didnt lose my camera when i brought it in to be cleaned i would have posted a pic by now of where the impossible bolt is to get off and put on and you will have a good idea of what the wrench needs to look like.

If you have the s-pipe then bring it into sears with you and hold a wrench up to it to see how it fits (or how it does not fit as the case amy be) and you will get an idea of what to look for....getting your hand up there is another issue.

 

[RXMmazdaspeed]

my hands arent huge so im hopin they will be good... as for the open ended box wrench bent off to the side.. i will have to bring my s pipe in as you suggested and check it out at sears or somewhere. thanks for the help.

 

[evilmonkeyMSP]

If all else fails...just hit everything you see w/ a hammer...it should work out...

 

[lcruz64]

S-pipes will be available seperately @ $189

Is there a discount for customers buying both the Corksport down pipe and the exhaust at the same time?

 

[evilmonkeyMSP]

contact travis @ corksport, he would be the one to ask but I don't beleive there is...

Is there a discount for customers buying both the Corksport down pipe and the exhaust at the same time?

 

[RXMmazdaspeed]

or rich would be helpful... he's always been quick in responding to my questions via email.

 

[evilmonkeyMSP]

penis

 

[lcruz64]

anyone knows if there's a dyno sheet for the turbo-back setup?

 

[evilmonkeyMSP]

not that I've seen

 

[RXMmazdaspeed]

anyone knows if there's a dyno sheet for the turbo-back setup?

id love that

 

[RXMmazdaspeed]

penis

fa fa fa fa fa faaaagina

 

[evilmonkeyMSP]

"Yes I'd 3000 of your chicken Fagitas"

fa fa fa fa fa faaaagina

 

[RXMmazdaspeed]

hahahahaha

 

[RXMmazdaspeed]

yep....you will need tiny hands and a open ended box wrench where the end of it is bent off to the side. If bestbuy didnt lose my camera when i brought it in to be cleaned i would have posted a pic by now of where the impossible bolt is to get off and put on and you will have a good idea of what the wrench needs to look like.

If you have the s-pipe then bring it into sears with you and hold a wrench up to it to see how it fits (or how it does not fit as the case amy be) and you will get an idea of what to look for....getting your hand up there is another issue.

would this work.....

http://www.sears.com/sr/javasr/product.do?vertical=TOOL&pid=00944360000&bidsite=&BV_UseBVCookie=Yes

 

[CorkSport]

lcruz64

anyone knows if there's a dyno sheet for the turbo-back setup?

The only dyno sheets are on the website on the Unichip. I'll have to double check though.

Is there a discount for customers buying both the Corksport down pipe and the exhaust at the same time?

E mail me.

 

[CustomMSP]

So has anyone installed one yet?

Thanks.

 

[RenzoMSP]

So has anyone installed one yet?

Thanks.

(mswerd)