Nordberg said:
Anyone wnat to help out with the amp settings.
I'll try my best, but you can only adjust it to your own likings. On the back of the amp there a Infrasonic EQ, I would set the switch at around 23 hz, this way you won't be playing notes you can't hear. Make sure that the mode switch is turned to on. You can hear notes only down to 20hz, I'd set it on 23 to be on the safe side. (Just Guestimate)
Next- You should now adjust the Bass Boost, on the back of the amp is says Boost (dB). I hope this isn't turned all the way up, if it is, then it sounds like s*** I'm sure. I'd turn it to about +8 or so, give or take a few notches, set it to your liking...but please don't turn it to +15.
Next-You should see a Bass EQ Switch, turn it on.. then Where it says "Q"...turn to about 1.1
Next-There is a switch on the left side of the amp, called Filter Slope, I keep it on 24dB.
I think that just about covers it, if this doesn't sound good to you, at least you know what knobs and switches to change. Be sure and remember what they are set at now, just in case you decide to go back to them for whatever reason. HTH
-Patrick