-
-
JHello folks! I know this is not the CX-90 forum and am not aware if it has been posted over there or not. For those of us who have been...
-
JJmaz replied to the thread 2013~2016 Knock noise from CX-5 front.Were the strut mounts replaced when the struts were replaced. Although I wouldn't go back to Monroe, I've had their Quikstruts twice on...
-
JJmaz replied to the thread Brake knocking noise...Anyone else? 2017 CX-5.A "knocking noise" description is pretty general. Where does it seem like it's coming from? Is it even coming from the wheel /brake...
-
JJmaz replied to the thread Shift Switch Replacement issue...Any ideas? 2015 CX-5 Automatic.My 2014 Touring was built on 9/2013 and has the straight (non-gated) shifter.
-
JJmaz replied to the thread 2013~2016 CX-5 DIY Control Arm Replacement Difficulty?.It's only one of many penetrating oils and concoctions for loosening rusted parts and it has it's proponents. However, if you've ever...
-
JJmaz replied to the thread 2013 CX-5 P0302 Cylinder 2 Misfire issue.What do the plugs look like after pulling them out? Is #2 plug fouled compared to the others and it might take a few months for it to...
-
JJmaz replied to the thread 2017 CX-5 GT - Plugs and Transmission Fluid.Offhand I don't know the price of an OEM Mazda wheel bearing but aftermarket wheel bearings can be a crapshoot. The one's with the '...
-
JJmaz reacted to RedBaron's post in the thread 2019 CX-5 Vibration issue...Lower control arm bushing? with
Like.
Probably not that rubber causing it. But you may well have something worse wrong with your suspension or wheel hubs. Best take it to a... -
JJmaz replied to the thread Won't Start. Dashboard lights up but not seeing fob (2016 CX-5).Sounds like it could be the "room fuse" (and is labeled as such in the fuse box lid) is blown from shorting out when changing the bulb...
-
JJmaz replied to the thread CX-5 heater core issues discussed on another Mazda forum.Yep, still have the 2014 CX-5 NA Touring. I just used Zerex Asian green. The factory fill was changed out at 6 years. The second was 2...
-
JI have a complete brake tool set in a nice molded box and paid ~$70 many years ago for the rear brake job on my 2001.5 VW Passat GLX...
-
JJmaz replied to the thread Rear brake job price reasonable?.That makes sense. Hopefully you find your kit before it's needed again.
-
JJmaz replied to the thread CX-5 heater core issues discussed on another Mazda forum.The 2 times I replaced coolant by doing 2X drain and fill (once at ~44k miles/6 year mark and once 2 weeks ago) I just opened the little...
-
JJmaz replied to the thread Rear brake job price reasonable?.And "of course" we can always drive to the auto parts store to find a greasy ,incomplete kit after standing in line. It's possible. Then...
-
JJmaz replied to the thread Rear brake job price reasonable?.Absolutely correct. I used one of these kits with both the L/H and R/H rewind tools. Paid about ~$20 for it maybe 7 years ago. Ebay is...
-
-
Loading…
-
Loading…
-
Loading…