Which wire...?

[tweaker]

I just purchased an autometer mech. boost gauge...and the white wire goes to +12v and black to ground...where would a good spot for the +12v wire to be ran? i searched...but just found tons of where to t-off the vac hose...nothing really other than that...thanx guys!

 

[hawaiian_msp]

i think its the green wire with the black stripe in a bundle of wires by the driver side kick panel, thats the parking light wire so the gauge lights up when you turn on your lights. thats where I tapped into and mine works fine

 

[BremertonMSP]

I just purchased an autometer mech. boost gauge...and the white wire goes to +12v and black to ground...where would a good spot for the +12v wire to be ran? i searched...but just found tons of where to t-off the vac hose...nothing really other than that...thanx guys!

Try this

http://www.msprotege.com/vbb225/showthread.php?s=&threadid=39088

I don't know where the green wire is in the bundle behind the kick panel is, but if you can't find it, read through this thread.

 

[tweaker]

hey thanx for the help...