I am attempting to replace my timing belt and water pump and and v-belts. I got the water pump installed and I was having a tough time with the timing belt. The first time it had a rough start so I knew it was not set right. I re-did it and thought I had it right, I even stuck a dowel in the 1st cylinder to find the highest point of the valve while cranking the crankshaft to index it. The car simply will not start.
It has 3/4 tank of gas, all the hoses/wires are connected.
I have the camshafts lined up and the crankshaft TDC (I beleive).
Took the battery to Autozone for a testing and it has an 89% charge.
The engine turns but will not start, I replaced the old spark plugs with new Bosch platinums (no gapping required). Here are some pics, can you tell me if they are aligned correctly? I really appreciate it, been without my car for 4 days now.


It has 3/4 tank of gas, all the hoses/wires are connected.
I have the camshafts lined up and the crankshaft TDC (I beleive).
Took the battery to Autozone for a testing and it has an 89% charge.
The engine turns but will not start, I replaced the old spark plugs with new Bosch platinums (no gapping required). Here are some pics, can you tell me if they are aligned correctly? I really appreciate it, been without my car for 4 days now.

