stock bpv hose?

[ONRAILS]

Do you know what kind of hose that is? Was thinking of getting a Forged bpv, and wanted to be able to just swap it with the hose included, so I could easily go back to stock when needed.

Thanks,

 

[Striker187]

just a guess...3/4" ID hose.

 

[ONRAILS]

just a guess...3/4" ID hose.

ID hose?

 

[kingpin7666]

hey if you could please post a how to. not because im a moron but theres a couple of guys where im at who might be intrested in a forge bypass valve. plus its good to have

 

[evo..eater:)]

ID hose?

Inner Diameter of the hose.

 

[ONRAILS]

Inner Diameter of the hose.

oh! lol, duh
I was really wondering what type of hose... like vacuum, or fuel.

 

[BMC]

Took mine off yesturday...looks like regular vacuum hose to me. On a side note...has anyone gotten theirs off without cutting? I just gave up and cut the thing off the T. Looking back I guess I could have used a heat gun. (hand)

 

[Striker187]

d_stickney - oh hahahaha, yeah you can probably just use a vacuum hose.

bmc - you should have been able to take the stock one off no problem. just need some pliers for the hose clamps. the bpv itself stays connected to both hoses. but the other ends of the hoses is what you should disconnect from the stock setup.

 

[muohio]

bmc - you should have been able to take the stock one off no problem. just need some pliers for the hose clamps. the bpv itself stays connected to both hoses. but the other ends of the hoses is what you should disconnect from the stock setup.

I think he was referring to the hose that comes off the t which feeds the wastegate. I had to cut mine off as well since they glue the hoses onto the t.

 

[BMC]

I think he was referring to the hose that comes off the t which feeds the wastegate. I had to cut mine off as well since they glue the hoses onto the t.

That'd be the one.