quick question!

[traser19]

i start my car one day and my sub in the back dnt work

looked at my amp and the light was on

i changed the fuse on my amp and still dnt work

i took the amp in and there was nothing wrong with it

wat would u think it could be? is there any other fuses i should look for?

 

[910MSPRacer]

mine did the same thing, and the sub was completely blown, or so i thought, but the wire had come loose on the sub somehow. check it out.

 

[traser19]

no its not the sub i think its power going to the amp cuz i took my sub in the house and hooked it up and it wrked, its just wen i plug all the s*** into the amp no power or somthin, cuz the light on the amp dsnt even come on

 

[smo0f]

well besides power, you gotta make sure the RCAs haven't come loose at either end.

 

[traser19]

no loose one on the amp side were is the other side? is it in the fuse box by the battery?

 

[smo0f]

hmm.. no. the RCAs are the cables that transfer the audio signal from your radio to your amp. make sure those aren't loose on either end.

 

[traser19]

ya i pulled my deck out with a buddy but ill take another look right now


if u have any other ideas plz post

 

[smo0f]

either busted amp or busted sub. keep checkin everything. oh and make sure you didn't accidentally turn of NF on the radio. on the stock msp kenwood, you just hold down the top left most button. i think it's either AM or FM, haven't seen my car for a while. hold it for a seconds while you're listening to a radio station or cd and then it should show confirmation on the screen whether it's on or off.