motor build?

found out im gonna have to get my corksport exhaust welded today
028-1.jpg
 
are you running a jands safeguard with ur setup?

And what would I hook it up to... I have no Stock ECU...


definitely want to know how those coils work out

Ya im hoping i will never get a missfire again. I just hope the body shop hurrys up and paints the engine bay

I have had that CDI for two years, It's SOLID!

How much? And how long would you say it takes to wire in a haltech?

I will sell you the straight pipe for what I paid for it $45.00. Shipping out west will be like $5 so call it $50
LMK if you need a picture..

The length of time required... That is up to the individual and the level of car you put into it..
 
Last edited:
And what would I hook it up to... I have no Stock ECU...


K cool ill get back to u on the coolant pipe cuz i might not need it.



I have had that CDI for two years, It's SOLID!



I will sell you the straight pipe for what I paid for it $45.00. Shipping out west will be like $5 so call it $50
LMK if you need a picture..

The length of time required... That is up to the individual and the level of car you put into it..
 
this is the second exhaust I have seen cracked right there. I have even seen a few cracked CS exhausts with the MS3 guys too

Ya lol it makes the exhaust really loud. I called corksport but im passed my warranty they said they can give me a deal on a new pipe but i might just get it welded
 
Im thinking i might get the old transmission steam cleaned and parts of the engine too. Theres oil allover from the other motor that broke.
 
Bump so i got a blockheater and lowtemp thermostat. I hope this car is done for the fall atleast. Than over the winter i might end up building the transmission.
 
Just got a sick steering wheel from crossover, i will order the hub soon too. Axels are back in blockheater in soon along with intake and turbo oil and coolant lines.
 
043-2.jpg

046-1.jpg

047-1.jpg

048-1.jpg

044-3.jpg

045-2.jpg

So im missing a fitting for the perrin fuel rail. Also not sure how the other fuel lines are gonna work with the fpr. Also my egr hose for the 505manifold will not fit on to the steedspeed egr fitting.
 
for the EGR fitting, go back to the group buy thread. He has the part numbers for the correct fittings that you can get from either Lowe's or Home Depot. Or PM him and have him send you the fittings.
 
for the EGR fitting, go back to the group buy thread. He has the part numbers for the correct fittings that you can get from either Lowe's or Home Depot. Or PM him and have him send you the fittings.

ya i think he said he was sending me some. Not sure if he ended up sending them yet.
 
Back