GB: mazdaspeed 6 brake kit

[dandan2]

+1 i might jump on this seeing im fixing to do my brakes.

 

[mechanic mike]

I pm'd you my phone #

 

[destineal]

There's an issue. The supplier shipped MZ6 calipers instead of MS6 calipers. I guess dodge is still getting it straightened out.

 

[Outlawstar98]

Aslong as they are bigger, thats all that matters, unless they dont match the rotors.

 

[mechanic mike]

Advance Autoparts, O'reilly's Autoparts, and Autozone including online stores like Rockauto all say that their computers show calipers and rotors for 06-07 Mazdaspeed 6. I personally purchased from O'reillys and Advance Auto the Mazdaspeed 6 calipers and rotors, the front rotors are 12.58"/320mm and the rear rotors are 12.35"/314mm which are correct but the calipers that thay all list fit the Mazda 6 NOT the Mazdaspeed 6

 

[mechanic mike]

Correct part #'s for Big Brake setup conversion are as follows:
(These part #'s are exact fit for 06-07 Mazdaspeed 6 not Mazda 6)

A1/Cardone Rotors.........Wearever Rotors................Size
Front: 81-900454.......................YH200375................12.58/320mm
Rear: 81-900438.......................YH200374................12.35/314mm

 

[mechanic mike]

All of the Autoparts I listed above show A1/Cardone calipers and Wagner calipers that they say are to fit the 06-07 Mazdaspeed 6. THEY ARE ALL WRONG! Here is the list of #'s to stay away from:

A1/Cardone Loaded and Unloaded Calipers
16-5000,16-5001,16-5002,16-5003,18-5000,18-5001,18-5002,18-5003
Wagner Loaded and Unloaded Calipers
CR140130,CR140131,CR140179,140180

 

[mechanic mike]

Hey Curtis, on page 6 message #87 of this here thread you say you have 4 sets ready to ship. Wondering if I am getting one of these sets and when?

 

[dodgetech81]

Hey Curtis, on page 6 message #87 of this here thread you say you have 4 sets ready to ship. Wondering if I am getting one of these sets and when?

talked via phone call

 

[dodgetech81]

Aslong as they are bigger, thats all that matters, unless they dont match the rotors.

you would be interested in the reg mazda 6 set up not the speed?

 

[Outlawstar98]

I rather have the mazdaspeed6 one though. lol

I just want info on slotted onesssssss haha

 

[dodgetech81]

ok so as destineal stated ive ran into a issue with the calipers.when i went to test fit before shipping i found i had the wrong calpiers.they were the mazda 6 not the speed 6.
ive got 2 diff reps from 2 diff companies searching hi and low.it MIGHT end up turning into a rebuilt caliper deal along with a core charge for the protege calipers but that remains to be seen.we are also looking into what other vehicle may have the same caliper that is less rare then the speed 6.im doing everything in my power to get this resolved and back on track and keep the pricing the same.
as far as for anyone who would want the mazda 6 (not the speed) set up i am capable of that as we speak.the price would be the same because that was what i was anitially quoted for.
everyone who has sent payment has been contacted via phone call and will continue to be updated as i am.
my apologies to everyone
-curtis

 

[dodgetech81]

I rather have the mazdaspeed6 one though. lol

I just want info on slotted onesssssss haha

haha sorry bout the delay on the slotted rotors ive been going nuts trying to figure out the caliper deal.and trying to figure out how to help detineal out since his caliper is frozen.i ended up just sending him one of my calipers until i get this all worked out.
as far as slotted the pricing will be the same as the drilled and slotted.

 

[dodgetech81]

oh and BTW the drilled/slotted or just slotted come with painted hubs

 

[Outlawstar98]

Ok, Once you 100% figure out whats going on with them, PM me k?

 

[destineal]

Hey Curtis, do you have a trackiing # for the temp. caliper?

 

[dodgetech81]

Ok, Once you 100% figure out whats going on with them, PM me k?

will do.

 

[dodgetech81]

Hey Curtis, do you have a trackiing # for the temp. caliper?

Pm'ed the tracking number for the caliper

 

[coperspeed]

I subcribed for this: 4. front calipers with brackets $250

Do you have a paypal adress or anything... For the paiement and price for shipping to canada?

 

[dodgetech81]

I subcribed for this: 4. front calipers with brackets $250

Do you have a paypal adress or anything... For the paiement and price for shipping to canada?

i do have paypal but am not accepting anymore payments due to a caliper issue.im working on getting it straightend out and will inform you as soon as i get the issue resolved