So I recently bought a nice 1987 B2200 truck to replace my ailing 1991 626 car; sadly (or happily) the truck needs some work.
I finally got it running (anyone who saw my last post knows the problem) and after the carburetor was replaced it's up and moving now. I just have a small checklist of problems that need addressing and any advice the Mazda community can give would be much appreciated.
Included are several pictures of under the hood and the body.
There are a few rust spots on the body, and there is a very slight dent above the driver's side front wheel well, but other than that it's in good shape.
As it moves along I will keep the community posted.
I finally got it running (anyone who saw my last post knows the problem) and after the carburetor was replaced it's up and moving now. I just have a small checklist of problems that need addressing and any advice the Mazda community can give would be much appreciated.
- Bleed the brakes
- Install rear bumper
- Install 4 matching tires (P205/70/R14)
- Fix turn signals
- Replace battery
- Replace missing/damaged hoses
- New paint
- Repair rust spots
- Fix dent
Included are several pictures of under the hood and the body.
There are a few rust spots on the body, and there is a very slight dent above the driver's side front wheel well, but other than that it's in good shape.
As it moves along I will keep the community posted.
