AFC-SplitSecond PSC1 Map Library

[tallrd]

cool! thanks maxx

 

[Maxx Mazda]

No prob Bob...

 

[S.A.MSP]

I have the DSM and my car still boggs, then i disconnect the battery to reset then all is well for like two days to a week, then it happens more right after i fill my tank, i run 93 because my gas is payed for (nana) does anyone have a leaner fuel map or somewhat of an idea on how to get rid of this problem

 

[Fudgie]

I have a 12-13 psi map for my car running a snow performance meth kit. PM if you need one.

 

[dannyboy17]

whats the best map here for these mods?

fmic
short ram intake, KN Filter
catback exhaust
440cc injectors
626 intake manifold
10psi?

 

[Karna]

can anyone help me out???
im a complete noob at this and i need a map,i have the split sec. version 2 and my mods are as follows:
-3" j-pipe back catless exhaust
-ION FMIC
-CAI w/forge recirculating valve
-440 cc wrx injectors
-relocated MAF
-step cooler plugs
-running about 13-14 psi (at high altitude here we lose about 1.5-2 psi so that would equal to about 11 psi at sea level)

i hope that helps and i really hope someone would help me with this because it would save me alot of time and money lol

 

[MSP Kirk]

Subbing

 

[S.A.MSP]

Bump

 

[Maxx Mazda]

can anyone help me out???
im a complete noob at this and i need a map,i have the split sec. version 2 and my mods are as follows:
-3" j-pipe back catless exhaust
-ION FMIC
-CAI w/forge recirculating valve
-440 cc wrx injectors
-relocated MAF
-step cooler plugs
-running about 13-14 psi (at high altitude here we lose about 1.5-2 psi so that would equal to about 11 psi at sea level)

i hope that helps and i really hope someone would help me with this because it would save me alot of time and money lol

My map might be able to get you kinda started, but you'll still need to tune it quite a bit.

 

[carbonkid]

sub'n

 

[fatti03msp]

hay guys im going to be getting a lot of shat for my car this month and i was wondering if anyone had the same mods or close to the same mods that i would be running.

HiBoost FMIC
Virbrant Tback 3"
Injen CAI
10 PSI

What im getting this month
SplitSecond AFC
Corksport Downpipe
GT28RS "Disco Potato"
ACT Stage 1 Heavy Duty Clutch
Fidanza Flywheel
Walbro fuel pump
10 PSI

 

[crashkelly]

hay guys im going to be getting a lot of shat for my car this month and i was wondering if anyone had the same mods or close to the same mods that i would be running.

HiBoost FMIC
Virbrant Tback 3"
Injen CAI
10 PSI

What im getting this month
SplitSecond AFC
Corksport Downpipe
GT28RS "Disco Potato"
ACT Stage 1 Heavy Duty Clutch
Fidanza Flywheel
Walbro fuel pump
10 PSI

hope you have new internals to compliment that gt28rs...

 

[S.A.MSP]

hope you have new internals to compliment that gt28rs...

yea, cause even on the stock turbo they still go boom, i gave them a little motivation tho hehe

 

[FLIP]

Whats up guys i just installed my Piggy back unit on my stock Protege 2.0 ES automatic.

wondering if you guys had a map for this. I know all of you are running boost so none of the maps help me.

I have a cold air intake, Full cat back. So basic engine mods.

Thanks

 

[Maxx Mazda]

Is it an AFC? You'll need to build a map from scratch if you're not boosted.

 

[magnumP5]

Sub...

Anyone have any problems with a relocated MAF, FMIC, etc? I'm worried about leaning out with the supermap and I really don't have time to develop my own from scratch. I also don't want to blow the motor when I'm out tuning it (I have V2).

 

[FLIP]

yes its the AFC

so no one has heard of someone doing it to a stock non boosted car lol


What do stock protege have as horsepower anyways

 

[ProtoType5]

yes its the AFC

so no one has heard of someone doing it to a stock non boosted car lol


What do stock protege have as horsepower anyways

HP...not much like 95whp stock...

Like he said, you'll have to build the maps from scratch....read the tutorial on
www.Splitsec.com

It may help you get started....Or take it to a tuner shop...They can build you a map, but it will take some time...

 

[lisevolution]

Sub...

Anyone have any problems with a relocated MAF, FMIC, etc? I'm worried about leaning out with the supermap and I really don't have time to develop my own from scratch. I also don't want to blow the motor when I'm out tuning it (I have V2).

I had this exact set up on my MSP and just ran the Supermap. You can definitely tune it for more, but you won't have any problems running that map

 

[magnumP5]

I had this exact set up on my MSP and just ran the Supermap. You can definitely tune it for more, but you won't have any problems running that map

Ah sweet. I'm definitely going to fine tune it I just wanted to make sure it would lean it out too much.