245/40/18 on a 18x8 +38 rim fit

AWDTerror

Member
:
2008 Rally Red Mitsubishi Evo X
245/40/18 on a 18x8 +38 rim fit *Now With Pics*

sumo htr III...on buddy club coilovers

discuss
 
Last edited:
I dont think it may, you have to do some major fender rolling and pulling. Unless your gonna raise your car up, cause thats my plan on my speed 6 as well, im going to put on 235/40-18's with a +40 offset, same 18x8 rims...

Oh my nickname for my car is "Stig"....
 
no i'm not asking....they fit, I put them on today. my fenders are rolled no rubbing.
 
You can probably fit 18x8 with +48 offset with those size tires with your suspension lowered decently, -2 camber and rolled rear fenders.
 
You can probably fit 18x8 with +48 offset with those size tires with your suspension lowered decently, -2 camber and rolled rear fenders.

Hey said that they DO fit. He was not asking if they did. Now I'm wondering if 245/40-18s would fit on a 18x8 @ 48mm offset with out rolling the fender.
 
img0921hw7.jpg

img0956li3.jpg

img0929rf6.jpg

img0925vj3.jpg

img0924ha1.jpg
 
summer i'm going to be getting some new rims with a higher offset +45 or +48 I should be able to go to a 265 width tire without any problems.
 
I wonder if this will fit with an 18x8 +48

I always get confused with offset. Will +48 stick out more or less than +38?

How much clearance do you have now on the inside?
 
Hey said that they DO fit. He was not asking if they did. Now I'm wondering if 245/40-18s would fit on a 18x8 @ 48mm offset with out rolling the fender.
I guess I read it wrong at work and I couldn't see and pictures. Oh well.

But damn, that looks pretty damn flush with the fenders. Nice!
 
I wonder if this will fit with an 18x8 +48

I always get confused with offset. Will +48 stick out more or less than +38?
techically less

How much clearance do you have now on the inside?
much more than stock
 
it will be .8" closer to the suspension than stock, but there is plenty of room there. no change on the distance toward the fender
 

New Threads and Articles

Back