-
-
MWell, just got my car insurance renewal notice and it's $150 higher than last year, which was $100 more than the year before per six...
-
Mmadar replied to the thread Maintenance is getting tiring….Hats off to you for still being able to do this. I just don't trust others to do such a simple procedure correctly. Most times, with my...
-
Mmadar replied to the thread CX-5 Hit a bear and the bear won.Absolutely. People don't understand the idea of energy absorption in today's cars. A few years back my 2007 Corlla got rear ended and...
-
Mmadar replied to the thread 2017~2024 Best brake pads for CX-5?.Akebono, Wagner are my favorites along with Centric rotors.
-
Mmadar replied to the thread Switched to 5W-30 from 0W-20.I'm not disagreeing with what you found, seems to be an ongoing debate. Research on this subject seems to evolve as we learn more about...
-
Mmadar replied to the thread Switched to 5W-30 from 0W-20.That's one of the things I try to look for. You'd be hard pressed to find a very low NOACK oil on the shelves of Walmart or any auto...
-
Mmadar replied to the thread Squeak from 2016.5 CX-5 when first pulling away.You're also supposed to put a dab of brake grease on the brake pad back plate as well as lube the spring clip hardware. Sounds like this...
-
Mmadar replied to the thread New CX-5, high pitched whine at 80 km/h (50 mph).This problem, if that is what it is, goes back to 2013 models and it still is coming up. I had a trans replaced on my 2014 because of...
-
Mmadar replied to the thread 2016 CX-5 Drive belt pricing.IF your tensioner is leaking get it replaced. A bad tensioner could result in a loose belt resulting in battery charging isssues, a/c...
-
Mmadar replied to the thread 2013~2016 CX-5 Services/maintenance required?.I would disregard those "finger tight" instructions altogether and just say to flat out get a torque wrench.
-
Mmadar replied to the thread 2013~2016 CX-5 Services/maintenance required?.Agree with this. I've changed many a fuel filter out that apparently have had little or no debris in at all. A lot of gas pumps, at...
-
Mmadar replied to the thread Grinding noise on new OEM brake/rotors (2018 CX-5).Have to go with Jmaz, best guess is the rotor guard or somehow the brake guide clips are moving and hitting the rotor. Or, since the...
-
Mmadar replied to the thread Fixed One Issue Another Came up - 2016 CX-5 Lifter knocking.Rod bearings ten to knock under load, main bearings tend to knock under floating or cruising conditions. Either or, sounds like a...
-
Mmadar replied to the thread Grinding noise on new OEM brake/rotors (2018 CX-5).Are there grooves or wear marks on the rotor?
-
Mmadar replied to the thread Grinding noise on new OEM brake/rotors (2018 CX-5).Are you sure it's not a wheel bearing sound?
-
-
Loading…
-
Loading…
-
Loading…
