Need Help

[SmotPro254]

I have a few questions, trying to see if anyone can help me out.

There is a white clip, on the wire harness that conects to the alternator underneath the intake manifold, where does that clip go?

On the wire harness that connects to the injectors, there is a ground wire, I think, it black with a yellow line through it under the intake. where does that go?

On the top of the engine, there is like a can shape thing with a couple hoses coming out of it, its on the left side of the intake manifold. One line goes to a metal smaller pipe, where do the other hose go? it has a small black clip on the end of the hose.

If anyone can help me out it would be much appreciated? If you need any clarification don't hesitate to ask.

 

[SmotPro254]

damb no help. Would anyone be willing to take off their intake and then take and post a picture of that area?

 

[SmotPro254]

pics

her are a few pics to see if that helps

 

[sam1]

I'll dig around the engine bay of the mazda to see if I can help you out. Won't be back until Tuesday tho.

 

[DubbyDoo]

ok the small clip goes on the starter, the metal ring is a ground that goes on the transmission, as for the third picture it comes out the can to the fuel purge sensor and then out the sensor to the fuel rail

 

[SmotPro254]

ok on this wire harness there are two white clips... one next to the starter and one next to the alternator... i would assume that the one next to the starter goes there but i can not find the spot for the other one?