xDJ DUBx's 03.5 Pure White LX-T

[Jprotege2000]

 

[Jprotege2000]

if you look closely you can see the foglights at the bottom, dont mind the rust on the hood

 

[mx-p5]

ah, yours are crossing cause the bumper isn't parallel to the ground, it's on a slant.

Happen to know anyone with a machine shop? Lol. You could have two little wedges made to level em out

unless you wanna ditch em off the bumper cause the shaking

FYI, I've got 70 duro motor mounts all around and get no vibrations from the foglights mounted where they are


and i won't mind your rust if you don't mind mind. lol

 

[Jprotege2000]

i just wonder if i can mount them to the sub frame the way that you do it, dont know if the proteges and the p5s have the same set up, i dont like how they stick out like that and you can see them from the side

 

[mx-p5]

not sure with that bumper.....

 

[Jprotege2000]

yea actually i do ive been meaning to fix the rust but just been having alot of rain here lately freaking sucks !!!!!!! it started about a month ago and its a freaking eye sore the whole rest of the car is mint except for that one spot

 

[Jprotege2000]

ill just have to take the bumper off and figure something out, maybe ill make some bracket extensions or something

 

[mx-p5]

njaremka has fogs mounted inside his sedan grille.

but, they aren't these, he used Civic foglights

 

[TWISFM]

I've got a TWM and love it

Not quite as low as some i've seen, but, still solid.

TWSIM, was it lower than your MSP shifter? I can't remember

don't ghetto rig your shifter.......the last thing you want is for it to give and you be stuck in whatever gear you're in

yes the twm shifter is shorter then the msp in throws and height

 

[Wagonbacker9]

i just wonder if i can mount them to the sub frame the way that you do it, dont know if the proteges and the p5s have the same set up, i dont like how they stick out like that and you can see them from the side

its a different piece, but it may still work... I assume you can remove the grill and take a look?

also pro5x2, thanks for the idea, I may be able to sneak fogs in just outboard and above your mounting location and sneak em in with the FMIC... either that or I can just wait til WI drops the front plate law and put em in the standard location. lol

 

[Jprotege2000]

couldnt find him spelling deff way off hahaha

 

[xDJ DUBx]

i see my name up there!!!!

i say, keep the body kit on the car, and just add the 03.5 rear spoiler.

There he is

 

[mx-p5]

its a different piece, but it may still work... I assume you can remove the grill and take a look?

also pro5x2, thanks for the idea, I may be able to sneak fogs in just outboard and above your mounting location and sneak em in with the FMIC... either that or I can just wait til WI drops the front plate law and put em in the standard location. lol

i'm gonna HIIIHGLY doubt the blazer fogs will fit with a FMIC

 

[njaremka]

Njacknemara (spellings off) has fogs mounted inside his sedan grille.

but, they aren't these, he used Civic foglights

lol, who?

 

[Wagonbacker9]

i'm gonna HIIIHGLY doubt the blazer fogs will fit with a FMIC

I'm not set on a type of fog... remember like 2 months ago I was bugging you about a mounting location? and actually my core is pretty skinny, so I could prb fit em. if you look at the pics in my FS thread (link in sig, I can't see em here) you can see how much space I've got.

 

[mx-p5]

lol, who?

lol. my bad. lol


(hi)

couldn't remember.

I'll just say "Drama Queen"

You seen my new pics?


and Wagon, where's them pics of the FMIC mounted? I"m curious

 

[Wagonbacker9]

lol. my bad. lol


(hi)

couldn't remember.

I'll just say "Drama Queen"

You seen my new pics?


and Wagon, where's them pics of the FMIC mounted? I"m curious

click on the "make offer" link in my sig... they should all be on the first page somewhere... you're lookin for the pics from the indy meet, before I had it plumbed up or the grill back on.

 

[mx-p5]

awww...such a cute little intercooler! (J/K) that is my jealously speaking

lol. Least it's not as small as the MSM's

but with the blazer fogs, they won't fit up in there, or did you remove the bumper support bracket?

 

[Wagonbacker9]

awww...such a cute little intercooler!

lol. Least it's not as small as the MSM's

but with the blazer fogs, they won't fit up in there, or did you remove the bumper support bracket?

its an itty bitty T25 turbo making a whopping 7lbs of boost.. how much intercooler does one really need? Plus I don't have the lag most who have gone FMIC (especially with all 2.5" tubing) complain of. My build plans don't justify anything larger.
and NO, my main FMIC core requisit was that it be as unintrusive as possible. I am considering notching the support so I can move the core up about an inch, maybe inch and a half... but then I would rebox the support bar so it'd prb end up stronger than it started. The main thing stopping me from doing this is that the boost tube routing would be more difficult with the core higher.

as I said, I don't have anything in my mind as to what type of fogs to mount, but that location should accomodate something.

 

[mx-p5]

i'm just playin. that'd be the FMIC i went with too personally

when and if

when and if


zoom.....pshhh