windshield wiper cap thingy

[SkinnyJoint]

hey wondering if anyone has the cap, that covers the bolt, that bolts on the front passenger side windshield wiper. so if u have an extra one or a spare p5 let me know so we can work somthing out. thanks

 

[TheBryGuy]

Windshield wipers? We don't need no stinking windshield wipers.

 

[SkinnyJoint]

lol, well they still work fine, i just dont like seeing that gold bolt/nut combo that is there

 

[azeli73]

Does this link work for ya?

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213824&chapter=ARH5416&appSectionid=2580&groupid=51864&subgroupid=2590&componentid=2382&make=22&model=Protege&year=2003&graphicID=5416362&callout=3&catalogid=2

 

[SkinnyJoint]

Does this link work for ya?

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213824&chapter=ARH5416&appSectionid=2580&groupid=51864&subgroupid=2590&componentid=2382&make=22&model=Protege&year=2003&graphicID=5416362&callout=3&catalogid=2

yes sir that is it.... 4 bux. hmmm lol. ill let this thread ride a lil more before i buy it but thx for the info

 

[azeli73]

It's one of those annoying pieces we all seem to lose. I've been missing the cowl cap for about a year but still won't break down and buy this $1.91 part


http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213824&chapter=ARH5416&appSectionid=2600&groupid=2600&subgroupid=2601&componentid=2285&make=22&model=Protege&year=2003&graphicID=5416370&callout=4&catalogid=2

 

[MrValve]

Does this link work for ya?

http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213824&chapter=ARH5416&appSectionid=2580&groupid=51864&subgroupid=2590&componentid=2382&make=22&model=Protege&year=2003&graphicID=5416362&callout=3&catalogid=2

That's nice to know. I'm missing the same piece on the rear wiper of my MPV van.

 

[redpr5]

lol, well they still work fine, i just dont like seeing that gold bolt/nut combo that is there

im missin a cap for the gold bolt that is in the corner of the windshield on my drivers side...any info on where i can get one of those?

 

[Lord_Zath]

put an LED light in there instead.

 

[aMaff]

im missin a cap for the gold bolt that is in the corner of the windshield on my drivers side...any info on where i can get one of those?

seriously, check post number 4....you didn't even read the thread b4 u posted did you? lol

 

[redpr5]

seriously, check post number 4....you didn't even read the thread b4 u posted did you? lol

actually i did read the post, and i realized that what skinny joint is talking about is not the same part that im missing. im talkin about the cap in the bottom right corner of the windshield, not the cap on the wiper arm. i did check that link...and to be honest, it just confused me lol

 

[Kansei]

I didn't know our cars came with these I just have one that I got off a friend's car that he was junking because it fit. It falls out though.

Edit: hey that web site is awesome. Anyone know the part number for the little plastic screws that hold our wheelwell covers to the front bumper? A couple of mine are stripped from repeatedly replacing and cleaning my cold air intake filter and I need to get my bumper off. The only way I can get it off right now is to destroy the plastic screws that are there.

 

[redpr5]

I didn't know our cars came with these I just have one that I got off a friend's car that he was junking because it fit. It falls out though.

yea i didnt know our cars had little plastic caps...until one fell off (bang) im prob gonna go search the local junkyard maybe i can find one.

 

[p5power]

It's one of those annoying pieces we all seem to lose. I've been missing the cowl cap for about a year but still won't break down and buy this $1.91 part

i have this one single clip/xmas tree thingy missing on my rear passenger side door thats been missing since i pulled off the trim to switch speakers about a year ago. it not being drives me up the freakin wall.

thanks for the site!! really going to come in handy!!

 

[Mr. Win]

I went to a junkyard and put it in my pocket.

 

[pasadena_commut]

Anyone know the part number for the little plastic screws that hold our wheelwell covers to the front bumper?

Short answer, no I don't know the number, but I did buy a bag of 8 (?) of them from the dealer because my car was missing a few, and some others were stripped like yours, and they were some painful price, like $10. (Painful because you just know they cost about a nickel each to make.) Unfortunately none of the auto supply stores around here had anything that would fit. They all stocked similar nylon screws but they were either too big or too small.

If you find a reasonable source for these please post it.

EDIT: look here
http://www.trademotion.com/partloca...=2003&graphicID=5416115&callout=9&catalogid=2
Unfortunately the price is still about $2 each.

 

[pasadena_commut]

i have this one single clip/xmas tree thingy missing on my rear passenger side door thats been missing since i pulled off the trim to switch speakers about a year ago.

Look here:

http://www.trademotion.com/partloca...3&make=22&model=Protege&year=2003&catalogid=2

it's either the clip type 1 or clip type 2.

 

[azeli73]

Look at post #6 man. It's the cap that cover the bolt that holds down your windshield cowl.

actually i did read the post, and i realized that what skinny joint is talking about is not the same part that im missing. im talkin about the cap in the bottom right corner of the windshield, not the cap on the wiper arm. i did check that link...and to be honest, it just confused me lol

Here is the tap/plastic screw that holds the bumper to the fender well:
http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213824&chapter=ARH5416&appSectionid=2399&groupid=51836&subgroupid=4092&componentid=2281&make=22&model=Protege&year=2003&graphicID=5416115&callout=9&catalogid=2

Look at the illustration so you know what you need.
Originally Posted by zverg
Anyone know the part number for the little plastic screws that hold our wheelwell covers to the front bumper?

Just so ya'll know. I have order from these people and I had no issues. Parts came pretty quick for my wifes volvo.

 

[Diehonda]

I went to a junkyard and put it in my pocket.

Proteges and MP5's must be safe drivers in my area. Salvage yards don't have any.


That site rocks, but one question if I can thread jack real quick. Why is it cheaper when it says dealer installed?
http://www.trademotion.com/partloca...7&make=22&model=Protege&year=2003&catalogid=2

 

[azeli73]

bahahaha, I've always wanted to pry apart the lens and housing to black out the chrome housing. I guess this means it can be done.