What have you done to your MSP today?

[mgerst1]

how hard is it to change headlight bulbs? ive never had to do it before

 

[Wagonbacker9]

pull the rubber boot back, release the spring clip, swap the bulb, reverse.

 

[mgerst1]

cool, if i get hid bulbs will it kill my battery if i dont have an hid kit cause i saw hid bulbs at a autoparts store

 

[Wagonbacker9]

HID bulbs? real ones, or blue halogens?

real HIDs require a ballast to run them.

no, it will not kill the battery.

 

[mgerst1]

oh ok then ill just get replacement bulbs instead. i dont want blue halogens, i do want really bright bulbs cause i almost had an accident last night cause i couldnt see s***

 

[isbre]

oh ok then ill just get replacement bulbs instead. i dont want blue halogens, i do want really bright bulbs cause i almost had an accident last night cause i couldnt see s***

Then Osram nightbreakers is a good choice.

 

[mgerst1]

thanks for the tip

 

[Laser Blue]

Last night and today:
Removed turbo and exhaust manifold and put in new professionally ported and decked oem manifold with new studs and bolts. Put in new oem wastegate actuator with new bracket and shield and cleaned up and re-installed turbo with new water line gaskets and oil drain o-ring.
I also put on my high polished manifold heat shield with new bolts.
Lastly, I removed the Forge BPV and put in the Boost Sciences RDV. I teed into the brake vac line and ran a new dedicated line to the RDV and replaced the stock vac line running to the wastegate actuator.
Total time spent... about 11 hours. Car is running great!!!(drive2)

 

[FLAMSP]

what exhaust mani did you take off Laser Blue?

 

[Laser Blue]

The stocker,,,

 

[mgerst1]

Last night and today:
Removed turbo and exhaust manifold and put in new professionally ported and decked oem manifold with new studs and bolts. Put in new oem wastegate actuator with new bracket and shield and cleaned up and re-installed turbo with new water line gaskets and oil drain o-ring.
I also put on my high polished manifold heat shield with new bolts.
Lastly, I removed the Forge BPV and put in the Boost Sciences RDV. I teed into the brake vac line and ran a new dedicated line to the RDV and replaced the stock vac line running to the wastegate actuator.
Total time spent... about 11 hours. Car is running great!!!(drive2)

how do you like the boostsciences rdv? i love mine

 

[Laser Blue]

I love it... turkey is 100% killed, and the RDV sounds freakin' cool!

 

[FLAMSP]

^pmed about the mani

 

[mgerst1]

I love it... turkey is 100% killed, and the RDV sounds freakin' cool!

i know, only time i have turkey is before car has a chance to warm up

 

[Ricktalife]

lets see a vid!

 

[mgerst1]

of what?

 

[Outlawstar98]

Hm.... I might wash and wax my car today... anyone wanna help that has a buffer? Lol

 

[FlyinHawaiian]

Installed the CustonMSP SMIC last night...

Car definitely pulls a bit harder and the lack of heat-soak is amazing. Love it!

 

[323]

cool. i was considering that smic. doesnt it eventually heatsoak after some driving tho

 

[Laser Blue]

Today I want to move my radio down where the radio pocket is now and install a single din gauge pod where the radio was. I can't find a how-to for getting the radio pocket out. Can someone who has done this help me out?