vacuum line sizes?
- Thread starter Dr0
- Start date
9/16" for the vacuum lines leading from the WGA and BPV up to the intake manifold. I'm not sure what the others sizes are.
By the way, most other guys on this forum won't respond to "stupid questions", as they think that you should use the search button for absolutely everything. But I understand being new to turbo cars and such (I am new to them as well).
By the way, most other guys on this forum won't respond to "stupid questions", as they think that you should use the search button for absolutely everything. But I understand being new to turbo cars and such (I am new to them as well).
bikingpro5
Member
- :
- 03 Protege5
3.5mm (5/32") - majority of vacuum lines on intake manifold
4mm (3/16") - wastegate actuator and emissions lines
6.35(1/4") - PCV and crankcase ventilation
http://www.mazdas247.com/forum/showthread.php?123687198-Vac-lines
4mm (3/16") - wastegate actuator and emissions lines
6.35(1/4") - PCV and crankcase ventilation
http://www.mazdas247.com/forum/showthread.php?123687198-Vac-lines
My bad, 3/16" is the correct sizing. If I were you, I would try Seafoaming your car to see if you have any vacuum leaks and go from there. That's how I found out my exhaust manifold gasket was leaking. That and the loud distinct hissing noise I would hear every time I would start it.
dimsumgalore
Member
- :
- 2003.5 Mazdaspeed Protege LASER BLUE
I would agree on the stupid question part but type in vacuum line sizes and find a post that says the size... I wouldn't post this if I haven't tried, BTW the search on this sized is a pain bc you gotta sift through tons of random posts bc of keywords...
But all in all, thank you very much that's exactly what I needed
But all in all, thank you very much that's exactly what I needed
Similar Threads
- Question
