The Ohio Random Thread... aka We Should Probably Be Working
- Thread starter THE Phen
- Start date
A nicer shell would definitly be nice to find. I have a feeling I'm going to turn my attention to modding our house once we get one.
I say paint now.
and have others seen this thread? besides Phen whose posted on it
http://www.mazdas247.com/forum/showthread.php?123818546-Introducing-the-All-New-2014-Mazda6
Looks pretty good to me and possible MSP replacement in about 4-5 years (cause I would probably buy used)
tripn4days
Member
- :
- 2006 MX-5
I'm in! Looks like a GREAT time! I did some karting in Cincinnati last fall and loved it. Are we meeting up and following each other out, or just showing up or what? You can text me, it's easier: 44o 477 6o7o
What do I need to wear? Track provides fire suits, or just wear long sleeves and pants or what?
Besides myself and perhaps a cooler of snacks/beverages, what else should I bring?
P.S. I *might* be able to get another person or two in on the event if you need me to. LMK
Last edited:
larry was saying upgrading to ms3 front and something bigger/stiffer than ms3 rear... no one was debating leaving the stock rear on learn to read there sweetheart
be at beaver run around 8am for registration, bring $90 cash for the event
you must wear long pants and closed toe shoes (no flip flops or sandals)
jacket, gloves, neck support and helmets are provided
i believe we are all just going to just meet at BeaveRun, but maybe you can shoot evan9999 or wannabe a pm since i believe they are the only other 2 coming from OH
as far as what to bring, just bring drinks and snacks for yourself.
ill shoot you a text later today or early tomorrow in case you dont see all this (717)372-9104 in case you have other questions, its quicker to get ahold of me that way
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
Not yet. I've found a few rear bars for cheap so I'll get one of them in the near future.
i'm bringing a case of water, anyone is welcome to indulge. also, i texted Levi my number so that someone has it if needed. we'll be leaving from my coworkers house in Lyndhurst at 6am, after grabbing a quick bite of breakfast. i'm anticipating being there right around 8.
tripn4days
Member
- :
- 2006 MX-5
Wannabe... You're from Painesville? I'm in Fairport. Strange I've not seen your speed6 around at all... I tend to notice them. I like your plate, too, BTW!
Coppertone
Member
- :
- '04 Mazda6s Hatch
maybe 'they' should/could set up a separate "Autocross BS Thread" to talk the talk in ...
I see that's Sunday of Labor Day weekend, we'll be around and it would be fun to watch ... please remind us on here as it gets closer and we'll probably come down to cheer you on!!
yeah, i live in south west painesville township, off stratford; over by hellriegels/east coast
i work in Mayfield, and I don't really venture east much.
edit: and my sig pic is about 5 years old...car looks slightly different, but the same plate
Last edited:
tripn4days
Member
- :
- 2006 MX-5
I'm playing Bocce at Hellreigels every Tuesday evening (friday)
Well, you're certainly not missing much, except the beach!
tripn4days
Member
- :
- 2006 MX-5
And tonight, in NON-autocross related news...
I just got new wheels!(headbang) WhooHoo!
(whistle) I just wont share what they're for...
I just got new wheels!(headbang) WhooHoo!
(whistle) I just wont share what they're for...
Last edited:
Fiji Mazda3
Member
- :
- 2014 Ford Focus ST
So I'm going to flip out at Hawk tomorrow. My pads on the rear passenger have been rattling for months and I can't get anything to stop it. Driving my car anymore makes it sound like a bigger piece of crap than it is. (lol2) I'm hoping Hawk will help me out somehow.
Very nice! They look awesome. What size and what are they wrapped in? And what other mods do you have Ben?
I would at least to the underbody. Those bodies are horable for their sub frames rotting and rusting away. As long as the underbody and frame is done good the rest of the shell should be fine and good until you decide to pain the rest of the part my 1980 Formula and the 1979 TA and the front end is a b**** especially with rusty bolts and depends on how "in shape" the front bumper is. They warp very easy and the lower grills can cost up to $300 for the set. What year is it and what model (firebird, formula, trans am, or esprit?) decals are pricey too, but the biggest concern is the shape of the underbody and the rear. Just my opinion from experience.
The shell will be fine, all the rusty stuff is getting replaced. 
My only question was, to paint the sub-frame now, or later. lol
I'm going to go ahead and paint it all up now. In thinking about it all day, I realized that I can either put it together now, and have to paint it later FOR SURE. Or, I can paint it now, and maybe not even have to touch it later, potentially saving myself half the work. And, covering it up so it doesn't get all crapped up shouldn't be hard. Really, the only part I need the sub-frame bolted up for is, to fit all the panels before welding. Once I get good gaps, I can weld the quarters on, then pull the sub-frame off, set it aside, and do the finish work to the rest of the car. (bondo, primer, paint, etc.)
1969 Convertible...
My only question was, to paint the sub-frame now, or later. lolI'm going to go ahead and paint it all up now. In thinking about it all day, I realized that I can either put it together now, and have to paint it later FOR SURE. Or, I can paint it now, and maybe not even have to touch it later, potentially saving myself half the work. And, covering it up so it doesn't get all crapped up shouldn't be hard. Really, the only part I need the sub-frame bolted up for is, to fit all the panels before welding. Once I get good gaps, I can weld the quarters on, then pull the sub-frame off, set it aside, and do the finish work to the rest of the car. (bondo, primer, paint, etc.)
1969 Convertible...
princess peach
Member
- :
- '92 Miata, '06 MS6
noice
tripn4days
Member
- :
- 2006 MX-5
The shell will be fine, all the rusty stuff is getting replaced.
Dont skimp on the POR-15 and you'll never have to worry about it!
Thanks; they are MUCHO lighter than the 'stang wheels...
17" Kosei's with Yoko Neova Advan 08 in 205/45's but they seem to have pretty wide shoulders. They look fatter than a 205 to me...
MS front and rear sways, full body kit, lowering springs, and shocks; HKS strutbar; the HP street brake kit (rotors, pads & SS lines) from Good-Win-Racing
I think I'm also going to try my hand at aluminum welding and see if I can make my own BeatRush chassis braces.... I'll report back on my success, if any, on that front. If I get the hang of it, maybe I'll make a few of each kind for folks?
Last edited:
I made an Auto-X chat htread in the Ohio section. Let's keep the talking going because newbs like me can learn from listening as well. And Josh won't get even more grumpy than he already is. He and I are about tied on crabbiness.
Ohio Auto-X thread here;
http://www.mazdas247.com/forum/show...Ohio-Auto-X-chat-thread&p=6000219#post6000219
Ohio Auto-X thread here;
http://www.mazdas247.com/forum/show...Ohio-Auto-X-chat-thread&p=6000219#post6000219
tripn4days
Member
- :
- 2006 MX-5
Sorry to make you two crabby.(sad2)
I dont actaully know any of you guys in person, so Mazda talk is about all I can contribute... But I do like turtles
I dont actaully know any of you guys in person, so Mazda talk is about all I can contribute... But I do like turtles
