Steering making noise (2019 CX-9). Any ideas?

[trinibrian2]

I havent increased the torque, and a needle tip of locktite should be fine in my personal opinion, otherwise just get in the habit of tightening it back up every few months if you have a load of dirt roads

I may be stupid, but what tool did u guys use to tighten this nut.

 

[trinibrian2]

its a lug nut bolt on the steering column that needs to be tightened thats what hes saying on the video

How do I tighten this. It's a tight fit for any regular tools. What did you guys use?

 

[trinibrian2]

Hope this helps

Hi, any idea of tool needed to tighten this bolt?

 

[trinibrian2]

It's fairly simple it's a little tough to get a wrench in there, I found it simplest to finger tighten, then spin the steering wheel and finger tighten as it backs off until it's tight. Then just the tiniest of turns with the wrench.

Just a bump

Hi. What tool did you use to get this to tighten?

 

[Agape_365]

Hi. What tool did you use to get this to tighten?

Adjustable spanner, turn the steering wheel and you can feel it pop out a bit tighten it down.

 

[Raptor#2018]

i took mine to the dealer for an oil change and they tightened up for free.

 

[Agape_365]

i took mine to the dealer for an oil change and they tightened up for free.

Some will dealers my area quoted about 3-5k to replace entire assembly