spring install problem on p5 rears!!!!

[Lexusviper]

I am trying to install my lowering springs and i got everything off the strut is loose and ready to come out but there is one bolt attaching the strut with a welded piece facing the rear of the car attached to the sway bar.

I can't get the bolt off. I read the directions in the how to section on spring install but it doesn't mention this bolt at all. Did anyone else have a problem removing the strut?

Thanks

 

[alprotege]

is it the end link,on mine the end link shaft kept spinning so we had some of the new rachet and sockets that are hollow in the middle so we spun it off with those and held the shaft with a allen wrench. might help.

 

[Lexusviper]

yea its the end link we can't get off the nut won't budge at all

 

[alprotege]

spray it down with wd40 and put a wrench on it then use another as a pry bar,or put a socket on it the use a wrench to pry up on the end of the rachet.

 

[RyanJayG]

use the allen wrench backup in the middle of it, and it that fails be prepared to cut it off, and get a new one

 

[DeanSweet]

can you please submit a picture of what you are talking about so I can start spraying mine down with some liquid wrench as I get closer to installing my springs... thank you.