Rear and Front Motor mounts

[ihone]

I'm looking for a set of someone's front (by radiator) and rear (below firewall on subframe) protege/protege5/msp motor mounts. THey must fit the BJ platform (1999-2003.5).

Doesn't matter how torn the rubber is - just need to have the mount in tact and the steel dowel that the bolt goes through with it.
Doesn't matter how rusty they are - they clean up real nice with a wire wheel and a little oil.

I just need those 2 mounts (if you have the remaining 2 - I'll take those too, but these 2 mounts are the important ones I want to start with).

PM's, emails, responses within this thread......I welcome them all!

Thanks,
JB

 

[ihone]

anyone?

 

[ihone]

bump?

Someone's gotta have a set of torn-up mounts they want to trash, but instead sell for cheap .... right?

 

[rit14623]

I'm looking for a set of someone's front (by radiator) and rear (below firewall on subframe) motor mounts.

Doesn't matter how torn the rubber is - just need to have the mount in tact and the steel dowel that the bolt goes through with it.
Doesn't matter how rusty they are - they clean up real nice with a wire wheel and a little oil.

I just need those 2 mounts (if you have the remaining 2 - I'll take those too, but these 2 mounts are the important ones I want to start with).

PM's, emails, responses within this thread......I welcome them all!

Thanks,
JB

I have an OEM front motor mount but not the bolt. I also have Corksport motor mount inserts as the rubber is torn.

 

[CTt3P5]

I have a PS mount with no rubber insert in the middle, there is some around the outer edge of the mount. If you'd like I can take a pic later and post it.

 

[CTt3P5]

A day late but here are those pics. No idea on what to even ask...$30 shipped since it's a bit heavy? Of course if it will work for what your plans may be.

 

[ihone]

pics - details.

I'll pay shipping for your trashed mounts - they're trash anyways, right?

 

[CTt3P5]

Pics are up...interested? And shipping is fair...it's been sitting in my garage collecting dust for a couple of weeks anyway. haha PM me the shipping address and I'll get a quote tomorrow.

 

[ihone]

30 bucks for a trashed mount is way outta the question honestly - especially since for not too much more than that - you can get a new one.

Thanks tho.

 

[CTt3P5]

Gotcha and as mentioned in my earlier post...really had no idea where to start. Did you miss my post above on accepting shipping fees or just not interested? Either way is fine, I'd gladly ship it to help ya out or just scrap it.

 

[ihone]

Internet was screwy at home lastnight as I was connected to VPN for work until after midnight (being on call BLOOOOOOOOOWS!). Your posts were showing up at really random times - apologies if I came off like a douche...because I'm really not.

Wouldn't you be able to ship it in a flat rate box from USPS? They're cheap and reliable. If not - get me a shipping quote and we'll figure it out. shipping to 77573 (League City, TX).

Thanks!

Now - anyone with a busted rear mount?

 

[CTt3P5]

I see....now it all makes sense. And no apology needed...douche.

Let me see if I can scrounge up a smaller flat rate box...all I have in my office are medium and large and this will easily fit into a smaller one.

 

[CTt3P5]

Mount won't fit in a small flat rate box so I have a medium flat rate box for it....$11.35 according to the USPS site. I have a smaller box that it fits right into and weight is approx 2lbs. If I ship it that way, Priority Mail, I get a quote of $8.75 + .75 for delivery confirmation. Just lmk if you are still interested.

 

[ihone]

very much still interested!

I can get another dowel for the center piece - how's 20 bucks sound? Should pay for shipping and your time - that good with you?

 

[CTt3P5]

Cool and how about we call it an even $10? I'll be able to get a gumball with the change.

 

[ihone]

ha...deal!

 

[ihone]

anyone with a ruined rear Motor Mount (the one that goes to below the firewall)?

I'll pay for shipping and your time, as this is for a bit of an experiment (I don't want to ruin my mounts or I'd use them......lol).

Thanks,
JB

 

[ihone]

bump?

 

[ihone]

anyone with a busted front and/or rear mount for a MTX P5/MSP/Protege?

 

[ihone]

Got a passenger side mount.

Really need someone to grab that busted mount off the garage floor/shelf and send it my way for next to nothing!

Anyone got the front and/or rear motor mount that are torn/trashed, that the steel is still good?