progress sway bar or racing beat sway bar

[Titanium-99]

you might have missed it, but i already have the bar and endlinks. i'm just getting ready to do the install, but thanks for the pep talk

My reply was for the guy that started this thread!

So you got the progress rear sway Bar for your msp? if you did you will need to use a socket and a jack to get the bushing brackets on. you will want to put the socket on the jack and then jack up the bracket till you crush it into place but you will want to have started at least one of the bolts on the bracket. if you get it to work the swaybar is going to rub like crazy on the latteral arms coming down from that center plater on the subframe.

so in theroy its not going to work but will at the same time. oh and the stock endlinks will be way to long!

 

[i12drivemyMP5]

P5 with progress 22mm + stock endlinks + 1.3 lowered = fits just fine & haven't broken a one.

 

[Focuz_Freek_XxX]

P5 with progress springs and progress bar and stock endlinks... Handles like a dream but can start to oversteer a lil bit on some slicker pavements and really tight and fast turns.....The bar is kinda noisy but my car is noisy anyway due to the hatch being gutted and the rear seats removed.

Also I have had 2 mounts break on me under very hard turns. but dont let that scare you away from the progress.

Overall great products from progress that is all i use really. On my Focus I had progress bars and springs.

James