This is my first issue with my daily driver P5 ('02 - MTX - No mods) First it has frickin pistons...LOL...I was pulling it into the garage and since my E-brake is shot I turn it off, open my garage, get in start it and pull her in. This time it just did exactly nothing. wouldn't start. I had just started it a half hour before with no problem. Now turn the key to start position, all the gauges/idiot lights go off and it is clicking the solenoid, but nothing from the starter. Zippo bupkiss...
Was doing some checking...Fuses are all good, and it has to be electrical something or another as the starter itself has been perfect, no problems of anykind. Is it the Starter Switch Interlock thing? If so, where in gods green earth is it? If not is there something else I should be looking for?
I am totally capable of doing the repair, if I can figure out whats wrong...Built my Gen II RX to a solid 11 second car and it still is "street legal". May not sound like much but I'm in Colorado and Bandimere is over 6500 ft above sea level...heheheheh....But Maggie (the P5) is my daily transpo and I need her back desperately....Thanks for any advice you can give that doesn't entail "take it to the dealer" there aren't any I like anywhere near me and they are going to charge $400 for a $30 job....
Thanks,
Dave Renshai
Was doing some checking...Fuses are all good, and it has to be electrical something or another as the starter itself has been perfect, no problems of anykind. Is it the Starter Switch Interlock thing? If so, where in gods green earth is it? If not is there something else I should be looking for?
I am totally capable of doing the repair, if I can figure out whats wrong...Built my Gen II RX to a solid 11 second car and it still is "street legal". May not sound like much but I'm in Colorado and Bandimere is over 6500 ft above sea level...heheheheh....But Maggie (the P5) is my daily transpo and I need her back desperately....Thanks for any advice you can give that doesn't entail "take it to the dealer" there aren't any I like anywhere near me and they are going to charge $400 for a $30 job....
Thanks,
Dave Renshai