yrwei52
2016 Mazda CX-5 GT AWD w/Tech Pkg From Plano, Texas, USA
- Joined
- Last seen
- Viewing thread Minimum thickness for front rotors? 2014 CX-5
Latest activity Postings Images About
-
-
yrwei52 replied to the thread Messed up electrical system after jumpstart? 2014 CX-5.You had DTC P0102 “Mass Air Flow Circuit Low” and DTC P061B “Internal Control Module Torque Calculation Performance” both point to... -
yrwei52 reacted to klnclouds's post in the thread Messed up electrical system after jumpstart? 2014 CX-5 with
Like.
Update: it was the MAF sensor! Replaced it with a new OEM part today and it ran like it did before. Wondering if the jumpstart somehow... -
yrwei52 reacted to ColoradoDriver's post in the thread 2013~2016 CX-5 CompleteStruts Front Strut assemblies? with Like.
I almost went the KYB route but decided to just stay OEM.
-
yrwei52 replied to the thread 2013~2016 CX-5 CompleteStruts Front Strut assemblies?.There’re too many aftermarket suspension parts available for our CX-5. If they’re an off-brand, you can only rely on a few reviews at...
-
yrwei52 replied to the thread Aftermarket fuel injectors ok? 2016 CX-5.Yes, and the NGK model number printed on the Mazda spark plug is the same too. But the price difference is significant. And there’re...
-
yrwei52 replied to the thread Aftermarket fuel injectors ok? 2016 CX-5.Yes it’s weird that the black protective tubing is gone on cylinder #4 coil pack wiring. The whole wiring harness would be expensive...
-
yrwei52 replied to the thread Aftermarket fuel injectors ok? 2016 CX-5.I almost wanted to say your could mistakenly think #4 cylinder you mentioned having the misfires is actually is the #1 cylinder based on...
-
I have an EFI race car that burns Methanol. Meth is hard on all the fuel components. It will foul injects. I have two sets of injects. 8...
-
yrwei52 replied to the thread Messed up electrical system after jumpstart? 2014 CX-5.No link?
-
yrwei52 reacted to Mach1tosh's post in the thread Messed up electrical system after jumpstart? 2014 CX-5 with Thinking.
Here's a thread from another site describing your situation. There may be a solution there...
-
yrwei52 replied to the thread Aftermarket fuel injectors ok? 2016 CX-5.:oops: 😍
-
Yes run a compression and leak down tests. Also, what does #4 spark plug look like compared to the others? They are very easy to remove...
-
yrwei52 replied to the thread Aftermarket fuel injectors ok? 2016 CX-5.At least in the US, Mazda recommends 87 API (91 RON) octane regular gas for our 2.5L NA, and suggests NOT to use any thing higher on...
-
yrwei52 replied to the thread Aftermarket fuel injectors ok? 2016 CX-5.“Spark plugs were oem, replaced with ngk iridium. No change.” Do you have Mazda OEM spark plugs; p/n PE5R-18-110, or NGK Laser Iridium...
-
yrwei52 replied to the thread Need advice on 2020 CX-5 Signature purchase.From TSB No.: 01-002-23: DESCRIPTION ⋯ Cracks may be caused by: • Expansion characteristics of the exhaust manifold during usage...
-
-
Loading…
-
Loading…
-
Loading…