-
-
duffbuster243 replied to the thread 2002 Protege5 Crank No Start.The fuel pump doesn't prime with key on with these cars, It won't turn on until the ECU detects the engine cranking by the Crankshaft... -
duffbuster243 replied to the thread Mazda Protege 1.6L Build.Nice Build, not many putting work into the 1.6 ever, even though it's a pretty stout engine. You should really ditch that SSAFC and move...
-
duffbuster243 replied to the thread Another Protege5 thread.post up some pics when done
-
I got a new turbo last night and a b series manifold, gonna get it welded up to an fs flange and go from there
-
duffbuster243 replied to the thread Another Protege5 thread.You may just need an oil restrictor in the oil pressure feed line. Many of these cheap turbos don't have them built in, too much oil...
-
duffbuster243 replied to the thread Guide: Run your Mazdaspeed Protege on a Speeduino.I would reach out to AEM and have them check the calibration on that Wideband Gauge. Especially if it is idling 100% smooth. I would say...
-
duffbuster243 replied to the thread Guide: Run your Mazdaspeed Protege on a Speeduino.Sounds like you have a lot going on there, but from my experience with batch fire injection on the fsde is that it wouldn't idle happily...
-
duffbuster243 replied to the thread Guide: Run your Mazdaspeed Protege on a Speeduino.Definitely get the Wideband working properly first, It's going to be basically impossible to get your afr anywhere close without it. you...
-
duffbuster243 replied to the thread Guide: Run your Mazdaspeed Protege on a Speeduino.I swapped in a cam wheel from a 98-02 626 with the fsde, it has a single tooth cam pickup. I had one laying in the parts bin from one of...
-
duffbuster243 replied to the thread Guide: Run your Mazdaspeed Protege on a Speeduino.Quick Update. I had a lot of trouble getting Sequential Injection to work. I would get a random misfire at idle speed below 1000rpm. It...
-
-
-
-
Loading…
-
Loading…
-
Loading…
Mazdas247 Stats
Top Resources
-
2nd Generation CX-9 DIY DirectoryA single location for 2nd Gen CX-9 DIY "How-To"s and Links- BRnPA
- Updated:
-
2013 - 2016 CX-5 Transmission Fluid Drain/Filter Replacement GuideThis is a guide/reference to draining your ATF FZ fluid as well as replacing the filter (strainer).
- Digbicks1234
- Updated:
-
How-To/DIY - Bose subwoofer improvementGen2 CX-9: Link to a How-To/DIY guide for improving the performance of the Bose subwoofer- sm1ke
- Updated: