MSP engine Needed

Status
Not open for further replies.
V

VisualValues

Member
:
Mazda Speed Protege
I'm looking for a replacement engine for a mazdaspeed protege. I'm looking for something local hopefully. I live in the Baltimore area. I have cash and I'm ready to purchase and pick up. I don't need the intake or exhaust manufold, if you have all of that I'd still be interested.

I'd also be interested in a non-msp engine as long as it's the 2.o engine. Let me know asap ... i have a trailer and cash ready to come pick it up.
 
check ur local salvage yards man! that would be ur best bet! or order one online! u just need any fsde 2.0 liter engine.
 
I checked and there are a few non msp engines in my area. I am assuming all I'll have to do is change the cams and install the tray above the oilpan.. Aside from that they are the same.

Does anyone know if there is a difference in the engines between manual and automatic? I notice that many sites have them listed seperately.... thanks for any advice....
 
VisualValues said:
I checked and there are a few non msp engines in my area. I am assuming all I'll have to do is change the cams and install the tray above the oilpan.. Aside from that they are the same.

Does anyone know if there is a difference in the engines between manual and automatic? I notice that many sites have them listed seperately.... thanks for any advice....
Click to expand...

no difference. you doing the work yourself?? if you aren't.. lmk. i do this stuff all the time.

I"m about an hour away from you
 
My friend and I are doing the work. I'm expecting it to be pretty straight forward. All these people at the junkyards are idiots. They keep saying, you can't put an automatic trans engine in a manual trans.. car.... I know they are idiots. but they want to argue with me every time I tell them what I'm doing.

Still looking for an engine if anyone has something............
 
If you get an N/A motor also swap the oil cooler. If you want to swap the the plastic cover you will also need to swap valve covers.
 
VisualValues said:
My friend and I are doing the work. I'm expecting it to be pretty straight forward. All these people at the junkyards are idiots. They keep saying, you can't put an automatic trans engine in a manual trans.. car.... I know they are idiots. but they want to argue with me every time I tell them what I'm doing.

Still looking for an engine if anyone has something............
Click to expand...


just tell them to sell you the short block, they are dumb asses and are trying to make extra money because our car says SPEED.. we all know there is no difference between the n/a auto 2.0 fsde and n/a 5spd fsde and the speed fsde... tell them you have a 2002 lx 2.0.. then they will sell it cheap.. if i didnt need my spare motor.. id sell it..
 
I found a 2002 Protege LX engine with 18,000 miles for $1,000 plus a $200 core charge. I guess that sounds like a good deal. I'm going to leave this post open and make a decision this afternoon.

Still checking out some other options. Thanks for the help from everyone.
 
VisualValues said:
I found a 2002 Protege LX engine with 18,000 miles for $1,000 plus a $200 core charge. I guess that sounds like a good deal. I'm going to leave this post open and make a decision this afternoon.

Still checking out some other options. Thanks for the help from everyone.
Click to expand...

check craigslist too...

do you need the intake manifold?? i'm looking for a spare..
 
All the engines are essentially the same, but they all do differ a little bit.

The MSP 2.0L has an oil cooler and a different bearing support plate which allows for oil return from the turbo. You can use NA engines and swap these parts over from your previous engine, or just tap into the oil pan if you don't want to swap the bearing support plate.

As far as the auto vs. manual differences, it's a matter of one bolt on the starter.. other than that they're the same engines. So you can use any auto or manual NA 2.0L engine, they ALL bolt up, and swap the oil cooler and support plate, or if you get lucky just get a MSP 2.0L that will be a direct swap.
 
boostdprotegelx said:
check craigslist too...

do you need the intake manifold?? i'm looking for a spare..
Click to expand...

I have a good manifold on the car engine so if I get one on the engine I buy I'll let you know. I'll give it to you in return for your help with any questions I may have along the way.

I checked craigs list and there is nothing there unless I was a whole new car. That's not worth it. I'd rather go with what I have an know what's under the hood.
 
VisualValues said:
I have a good manifold on the car engine so if I get one on the engine I buy I'll let you know. I'll give it to you in return for your help with any questions I may have along the way.

I checked craigs list and there is nothing there unless I was a whole new car. That's not worth it. I'd rather go with what I have an know what's under the hood.
Click to expand...

woot. awesome. yeah i can give you a hand i believe.. if you get a straight up long block- it'd be sweet. all you'd need to do is swap the oil girdle(support plate) and the oil cooler i think..and the obvious-turbo manifold, trans.
 
KrayzieFox said:
All the engines are essentially the same, but they all do differ a little bit.

The MSP 2.0L has an oil cooler and a different bearing support plate which allows for oil return from the turbo. You can use NA engines and swap these parts over from your previous engine, or just tap into the oil pan if you don't want to swap the bearing support plate.

As far as the auto vs. manual differences, it's a matter of one bolt on the starter.. other than that they're the same engines. So you can use any auto or manual NA 2.0L engine, they ALL bolt up, and swap the oil cooler and support plate, or if you get lucky just get a MSP 2.0L that will be a direct swap.
Click to expand...

there is a little more you have to do to swap a auto engine to a manual other then the starter
 
Status
Not open for further replies.

New Posts and Comments

Z
    • Like
Itching to customize my 2013 Mazda5
2 3
Replies
43
Views
1K
zoomies100
Z
R
Anyone bothered by the poor front LED lights?
Replies
13
Views
385
raikobg
R
R
    • Like
  • Sticky
What have you done to your Mazda5 today?
194 195 196
Replies
4K
Views
930K
theblooms
theblooms
dlarkin_dc
Recommendations for new brake pads?
Replies
16
Views
3K
Silentnoise713
S
M
    • Like
  • Question Question
Aftermarket Headunit Options that do it all?
Replies
7
Views
1K
Silentnoise713
S
L
  • Question Question
Can't get Alternator out, no space- CX-5
Replies
3
Views
151
N7turbo
N7turbo
View more…

New Threads and Articles

Back