Moroso Motorsports Park.

[08mazda2.0]

...s*** that sucks cause when i talked to the lady over the phone i mentioned that and she was like "yea we got lots of complains about them" them meaning palm beach mazda and she said that they will take care of me and i got nothing to worry about. We'll see when i get there i guess. OR ask your boy to make an appointment for me friday morning at around 8 or wen ever the dealer opens and i'll go over there. I want to get my clutch looked at too. I barely have to press it and it engages. It only clamps nice and firm early in the morning when the car is cold, other than that its like jello.

 

[laracroft]

My car's been in two front end wrecks... the alignment has never really been great. It pulls to the right constantly. Which is funny because the last accident it pulled to the left. Now all I have to do is get hit head on and I should be good to go! haha

 

[08mazda2.0]

does camber have anything to do with the car pulling? lets say my rear left tire has the most camber or both left side wheels have more camber than the right would it pull to the left?...might sound dumb but just throwing s*** out there.

 

[FrancoNemo]

does camber have anything to do with the car pulling? lets say my rear left tire has the most camber or both left side wheels have more camber than the right would it pull to the left?...might sound dumb but just throwing s*** out there.

yeaaa man mine pulls nasty my mazda emblem on da steering wheel faces like to da left to go straight lol

 

[08mazda2.0]

mine isnt that bad but it deff bothers me when i change lanes cause it looks like the car has sway when its really me trying to get back to center. It sucks. And when i turn it bugs me like crazy. I noticed my power steering fluid is like 1 inch bellow the line too...wtf..why? I popped the hood on my moms 06 altima that i ran pretty dam hard when i didnt have a car and the power steering fluid level is fine.

 

[laracroft]

does camber have anything to do with the car pulling? lets say my rear left tire has the most camber or both left side wheels have more camber than the right would it pull to the left?...might sound dumb but just throwing s*** out there.

Check the wear of your tires. There's a few reasons for the car to pull excessively to the right or left. Usually most cars will pull a bit to the right if you let go of the steering wheel. If it pulls too much or too quickly, it can be a couple things. Alignment's off, unevenly worn tires, bad bushings, or yes, the camber is off. Usually the car will pull in the direction of the more positive camber. Positive camber is when you look at the wheel and it seems to be going out, instead of in (which is negative camber). But it could also be that your tires are unevenly worn.

Hope this helps.

 

[08mazda2.0]

well they rotated my tires and one side has new tires (left side) while the right still has the old tires. Could it be because of that? Also lets say the impact caused the right side suspension to wear out to the point where my car was leaning to the left (looked lower on left side than the right side) which it was, would that also cause it to pull? The car is in the shop right now getting the springs changed because the jackasses at the dealer now think its the springs instead of changing out the whole suspension.
EDIT: they didn't rotate sorry, they put new tires on the left side since both rims were bent and ripped apart from the impact ( i was going 45mph but when the car slid i prob only slowed down to 30 or so)

 

[Dr. D]

does camber have anything to do with the car pulling? lets say my rear left tire has the most camber or both left side wheels have more camber than the right would it pull to the left?...might sound dumb but just throwing s*** out there.

thats called "toe" not "camber"

 

[Reyan]

well they rotated my tires and one side has new tires (left side) while the right still has the old tires. Could it be because of that? Also lets say the impact caused the right side suspension to wear out to the point where my car was leaning to the left (looked lower on left side than the right side) which it was, would that also cause it to pull? The car is in the shop right now getting the springs changed because the jackasses at the dealer now think its the springs instead of changing out the whole suspension.
EDIT: they didn't rotate sorry, they put new tires on the left side since both rims were bent and ripped apart from the impact ( i was going 45mph but when the car slid i prob only slowed down to 30 or so)

if you have new tires on on side and old on the other side it will pull, to align the wheels you must have good tires on the front, when you hit you car did the body shop put the car on a chassis alignment machine?

 

[Reyan]

yess sir i can talk 2 my boi! better yet delray is even better and wont void ur warranty... RPB is the same ppl from PB sooo Palmbeach was known for voiding warranties!

when you go to Delray ask them the have Jorge (puerto rican tech) work on your car, I'm dropping my car off today to get some tsb done and an oil change, he's gonna work on it for me. Tell him your a friend of Reyan and he'll hook you up.

 

[Reyan]

so the question what time does everyone want to meet? I am thinking around 5:00 at the lake worth station on the turnpike. and then roll out around 5:30 to the track.

 

[mx-p5]

i won't be there till nearly 8

 

[FrancoNemo]

when you go to Delray ask them the have Jorge (puerto rican tech) work on your car, I'm dropping my car off today to get some tsb done and an oil change, he's gonna work on it for me. Tell him your a friend of Reyan and he'll hook you up.

lol hell yea that guy is da s***! he worked on my car last time!!! i always go to him but i'll mention you next time!

 

[08mazda2.0]

if you have new tires on on side and old on the other side it will pull, to align the wheels you must have good tires on the front, when you hit you car did the body shop put the car on a chassis alignment machine?

yea they put it on the chassis alignment machine.

 

[FrancoNemo]

yea they put it on the chassis alignment machine.

guys shut up!!! im worring more and more about how much this is goin to cost me ahhhh
good news just spotted a used 08 speed 3 for real good price (fuoops)
i got a thousand bucks i could spare as down n they can take my sexyFkDWagon lets see how that goes! callin today!

 

[Reyan]

good luck,hopefully you can work a deal out.

 

[08mazda2.0]

guys shut up!!! im worring more and more about how much this is goin to cost me ahhhh
good news just spotted a used 08 speed 3 for real good price (fuoops)
i got a thousand bucks i could spare as down n they can take my sexyFkDWagon lets see how that goes! callin today!

ha ha...you really are trying to be upside down lol

 

[laracroft]

i won't be there till nearly 8

Same here. It'll take me a little while to get there after work - which I get off at 5. But I'll be there.

 

[08mazda2.0]

i'll be there around 5-6

 

[mx-p5]

I just got the bad news. I won't be making it down to the track. The wife closes Friday, and works early Sat, so, she won't be making it, and is asking that i bring her dinner, so, i'll have to meet up another night