interest in fmic local san diego speed shop

1. 10lbsmocc
2. SDMSP
3. SCRewDriveR
4. MSP FOR LIFE
5. Bill Harvey
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
 
I am definitely interested in this kit. I am in the market for a FMIC and intake so I would like the Stage 3. But I would like to see some pictures and number before I make my decision.
I definitely like the hahn setup. Please keep me posted for the update information.
 
I got a question. I am wondering why they used aluminum piping instead of SS piping?? This is most likely why the kit is a bit cheaper than most. I also was wondering what are the long term differences between SS and Aluminum??? will the aluminum rust after time??? why didnt they use SS piping? thanks for the help and hope to get a response to some of these important ?'s
 
the aluminum piping is what they normally use, just there standard. There won't be any long term problems even more so with the powder coating. I think if you absolutely wanted to go stainless they could do it if you want the polished look. But from what I gathered most people would either ceramic coat or powder their pipes.
 
Execuse my stupid question. When you ceramic or powder coat the tubes, do you coat only the outside or both inside and outside?
If you only coat the outside, will the aluminum rusty in the long run?
If SS is available, I will prefer SS because I do like the polish look. Will it cost more?
 
1. 10lbsmocc
2. SDMSP
3. SCRewDriveR
4. MSP FOR LIFE
5. Bill Harvey
6. MSP_HK
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
 
*BUMP* Any pictures up yet? and do you know if it's going to work w/the injen? if it does, me and my buddy will drive down there to pick up two

10lbsmocc said:
1. 10lbsmocc
2. SDMSP
3. SCRewDriveR
4. MSP FOR LIFE
5. Bill Harvey
6. MSP_HK
7. TGMarauder
8. VTECHTHISMSP
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
 
Sorry I will get some pics really soon it is presidents day so we have a big ass sale going on. There shouldn't be any problem with fitment with the injen since they tried to keep everything as stock looking as they can so if the injen fits with stock pipes then we are golden. Believe me I am as anxious as everyone else, everytime I call they try and hang up on me because i call everyday to check on the status.
 
I just wanted to let you guys know that the FMIC is really similar to the new post on the front mount on clints car. it is a new post but ironically enough the design is very similiar. I will be going to pannauto tomorrow so I will have some updates for you. Just keep patient everyone. thanks
 
I would be interested as long as I could buy it w/o the ram intake (i have injen already). And maybe I missed this in the 3 pages but what is the finish on them? I would like black powdercoat like my injen is.

And what every happened to those pics =).
 
yes it is still being made the cores should be here from australia on friday, then they will do a test fit to make sure everything lines up and then we are good. The design was so unique that pwr had to really step up to deliver especially making 25 cores.
 
hmm...doesn't pannauto usually race porsches ? that's so crazy...anyway, hope the FMIC comes out nicely ! woot...there will be many options for an FMIC soon
 
Back