interest in fmic local san diego speed shop

[SDMSP]

fresh tires!

not after we're done with them (burnout)
back to the topic, 10lbsmocc where are those pictures, I can't wait any more

 

[10lbsmocc]

ok so how can i post pics

 

[SDMSP]

Posting pictures for 10lbsmocc:

Looking great (thumb) , is there any cutting involved?

 

[10lbsmocc]

just a tad where the stock intercooler was to go past the fan shroud

 

[SDMSP]

Here is more:

 

[SDMSP]

good job man, it looks great, I can't wait to get mine. When they'll start taking orders?

 

[10lbsmocc]

oh and to answer the question about mods I am stock except for running 81/2-9 lbs of boost but that is it I will probably go back with the boost back at stock someday with stock pipes to get baseline #s

 

[hukster00]

ok, thanks so that was 161whp at 8 1/2-9psi , and i gess ic was dynoed at the same psi, and i dont see the bumper suport in the pix did they removie it do we have to remove it

 

[10lbsmocc]

they initially trimmed the excess metal off the bumper support because of the original design but they did not have to after all the only side effect is there is increased airflow to the radiator. If you look at your bumper support there is a box frame that is directly behind the styrofoam and below it where they cut is only a bit of sheetmetal that i don't believe adds to much to the stucture of the bumper strength

 

[bill harvey]

my issue sin't bumper strenth hell i had just enough metal to hold the bumper cover on, on my subaru, i just don't want to have to cut anything.

they initially trimmed the excess metal off the bumper support because of the original design but they did not have to after all the only side effect is there is increased airflow to the radiator. If you look at your bumper support there is a box frame that is directly behind the styrofoam and below it where they cut is only a bit of sheetmetal that i don't believe adds to much to the stucture of the bumper strength

 

[10lbsmocc]

yeah that is understandable I don't think they have to cut for this core but they need another MSP to go in to double check since mine is cut already

 

[10lbsmocc]

Oh and the last pic posted is the dyno from before and after but it is really dark. I copied it into power point and lightened it up. but i don't think I can save it and post it like that. if someone knows how that can repost that picture please do. thanks

 

[10lbsmocc]

I just wanted to clarify something, I guess some people have called Pann asking about the Hahn setup but this is kit is the PWR intercooler, oh yeah and still loving every minute of this intercooler. I had my car detailed at my work and parked in the front and some guys in a brand new srt-4 drive by then turn around and pull into the dealership looking(drooling) at my car. pretty funny

 

[hukster00]

i ajusted the pix for ya (dance)

 

[10lbsmocc]

Thanks I appreciate it, you would think that working on a computer all day and i could figure that out

 

[collegejoe101]

is this done and ready to buy?

 

[10lbsmocc]

The kit is done but they are waiting on the Hardpipes to return from LA they are making 25 kits to start with. Your best bet is too call them to get an eta on the kits and when they could ship.
www.pannauto.com
858 278 7266

 

[Dr.Sound]

hey, u said they need another MSP to make final adjustments and fitting....
i'm in if they need me.

 

[10lbsmocc]

I think the only question was the bumper support because they trimmed mine more than they needed to because of the other design so they need to look at a new bumper support to measure up against. Hey if you want to take a look at my car swing by my work at power ford in Huntington beach

 

[mattybo]

I think the only question was the bumper support because they trimmed mine more than they needed to because of the other design so they need to look at a new bumper support to measure up against. Hey if you want to take a look at my car swing by my work at power ford in Huntington beach

damn only 850 bucks? That kit looks sweeeeeet.