gt3071r project...heres the goods

[palerider]

looks great randy, well put together indeed. can't wait to see you break some axles with that monster torque j/k

it would tickle me if axles is all I break!!! Tell Zach to crack his knuckles if he sees my phone # pop up on your caller ID. I have a feeling my next call could cost around $4995.... know what I mean

 

[staples187]

it would tickle me if axles is all I break!!! Tell Zach to crack his knuckles if he sees my phone # pop up on your caller ID. I have a feeling my next call could cost around $4995.... know what I mean

I guarantee if not very soon, then soon. It'll take just one wrong down shift and here comes new forged internals! For what it's worth, I hope the motor stays strong. The SR20DETs bottom end are similar to ours and I've seen 350-400whp daily driven on GT28s, 18-21psi.

I just hope someone decides to make cams for our car and I'll be very happy. Doubtful, but one can wish.

 

[mrlilguy157]

I guarantee if not very soon, then soon. It'll take just one wrong down shift and here comes new forged internals! For what it's worth, I hope the motor stays strong. The SR20DETs bottom end are similar to ours and I've seen 350-400whp daily driven on GT28s, 18-21psi.

I just hope someone decides to make cams for our car and I'll be very happy. Doubtful, but one can wish.

actually. ken has a set of cams in the works, which he posted about awhile back. I actually sent him out a set that I had from the motor I bought. Hopefully we can see something in the next 6 weeks?

LOL on the wrong down shift. Was that supposed to be in reference to my incident?

 

[08ms3bm]

Zoom Zoom Boom!

 

[mrlilguy157]

Zoom Zoom Boom!

I've heard that about 1000 times. Too bad my incident had nothing to do with the big turbo . I wish I could blame it on that and not driver error.

 

[Haltech]

I guarantee if not very soon, then soon. It'll take just one wrong down shift and here comes new forged internals! For what it's worth, I hope the motor stays strong. The SR20DETs bottom end are similar to ours and I've seen 350-400whp daily driven on GT28s, 18-21psi.

I just hope someone decides to make cams for our car and I'll be very happy. Doubtful, but one can wish.

Crower is who you want making your cams. Either they can do a regrind to the factory cams you send OR they can start with billet blanks. You just have to do your research and get the spec's sorted. It will happen guys, just give it some time. Everyone is working hard to get out of the batting slump with this car. We all have alot of money tied up in different areas to promote it's success, believe me.

 

[Haltech]

Zoom Zoom Boom!

Wanna place a bet on that via paypal? ignorance is bliss sometimes.

 

[udontknowjack]

+1

good job randy...thats the route im going with next year....hope everything go smooth with your build....cant wait for some awsome number!!

 

[Sierra117]

Crower is who you want making your cams. Either they can do a regrind to the factory cams you send OR they can start with billet blanks. You just have to do your research and get the spec's sorted. It will happen guys, just give it some time. Everyone is working hard to get out of the batting slump with this car. We all have alot of money tied up in different areas to promote it's success, believe me.

Problem with Crower is this car will most likely be way low on the list of cars to hit. Go talk to IS300 guys who want an NA set up about Cams that have been coming out for longer than our AP.

 

[staples187]

actually. ken has a set of cams in the works, which he posted about awhile back. I actually sent him out a set that I had from the motor I bought. Hopefully we can see something in the next 6 weeks?

LOL on the wrong down shift. Was that supposed to be in reference to my incident?

LOL Basically ... Samething in any car though. A bigger turbo with no bottom end WILL eventually blow the motor if giving too much boost or a spike. We already said that the Piston pins are weak on our car at 330whp.

 

[avarela86]

I think its a line to the turbo... maybe coolant/ oil or something. I dont do my installs. Professionals do all my work...lol I just hang out there mostly.

Im excited about the cpe v2... its got variable boost control and secondary fueling capability. Im all ready planning a second fuel rail/ injectors if needed.... well... it will need it Theres a guy running 450hp in FL with a custom work done on the fuel system.... its the route I'll have to go as well I suppose. This setup Im hoping for 350-380whp..... we'll see.

What is this Florida car with 450HP? I'm curious....

PS- Everything looks real hot. Congrats on getting everything on.

 

[palerider]

What is this Florida car with 450HP? I'm curious....

PS- Everything looks real hot. Congrats on getting everything on.

we all are curious. But he supposedly exists. Hes running a part or two from ptp and has been discussed more at length on the new forum where they are a sponsor. Apparently its a rich dude with all custom work. He wired in a second fuel rail and a whole separate fuel system.

Its my understanding that these numbers were achieved on the stock motor. John at ptp actually claims to have spoken with and seen TWO cars with over 450 hp.... the second one I dont know as much about.

All his word... I havent confirmed it anywhere else.

 

[SPEED3TYPE2]

man your ride is the stuff so how does it drive witht he new turbo,manifold, dp.. and what psi are you running with the standback?

 

[mazdaspeedkid]

While Im at it I'll post some pics from the outside, taken this fall. The CB is Derek88s car.

And interior..... still my favorite mod to date..lol

My Autometer Nexus gauges with custom gauge pod... the remote control and datalogging module is in the glove box

hey where did u get that dash kit i need one like that it looks way better then the one i got on right now lol

 

[palerider]

custom made from the lotek pod and a oem dash piece. You got to make it yourself or pay for a custom. search the boards. theres guys that have them occasionally.

 

[mazdaspeedkid]

custom made from the lotek pod and a oem dash piece. You got to make it yourself or pay for a custom. search the boards. theres guys that have them occasionally.

hell i would pay for a custom one i dont got that much talent to do that how much would one cost i would buy one asap

 

[Haltech]

Problem with Crower is this car will most likely be way low on the list of cars to hit. Go talk to IS300 guys who want an NA set up about Cams that have been coming out for longer than our AP.

It's not impossible to get done. I have the proper contact.

 

[staples187]

It's not impossible to get done. I have the proper contact.

I would love to have a set of cams, gears, dual springs and retainers from Crower. I'm working on my bottom end build and want something for top end.

 

[mrlilguy157]

you guys are crazy. PG already announced that cams were coming... I sent him the extra set of stock cams awhile back, thats no secret.

More lift and longer duration ftw.

 

[staples187]

you guys are crazy. PG already announced that cams were coming... I sent him the extra set of stock cams awhile back, thats no secret.

More lift and longer duration ftw.

I'm a fan!