Drain line

[chdesign]

Ok everyoen what size shoudl I use for my actual drain line from the turbo -8AN or -10AN Let me know what you guys think.

 

[Chojin]

chdesign -

I would use the same size as your turbo's oil outlet. Most are -8AN and that's what we're using on ours.

Cheers.

-Shawn

 

[spoolinmp3]

Yeah our kits come with -8 oil return lines and -4 feed lines

 

[chdesign]

well my oil drain it odd sized......its round but with a flat edge so I need to hone it out to make it round and tap it to use a AN fitting in ti. Damn blitz turbo........making me use their fitting HELL NO!!!! Well i will hone it out get a fitting and fit a NPT thread to AN thread adapter in it and go from there. I may have to use a -10 line. Either way it will work!!!!

 

[Kooldino]

WTF does "AN" stand for? and what does the # represent? I understand about oil lines for turbos, but just didn't know what all this business was about.

 

[chdesign]

I'm not sure what AN stands for I know that NPT is Navy Pipe Thread. The number on the thing is the size the bigger the number the bigger the line.