-
-
Eerhayes replied to the thread My CX-5 wouldn't start yesterday! *Happy ending.OR a poor ground as from battery to ground. Remove, clean and replace each ground.
-
Eerhayes replied to the thread Thinking of giving my CX-5 with 105K miles to daughter.I agree
-
Eerhayes replied to the thread 2018 CX-5 Starter starts then pauses, then cranks till it starts.+1 connections.
-
Eerhayes replied to the thread 2019 CX-5 Leaking oil under the car.+1 Conrad16.5. Totally depends on the dealerships attitude toward service.
-
Eerhayes replied to the thread 2019 CX-5 Leaking oil under the car.Let the dealer solve this problem and report in writing to the leaderships OWNER and cc the service manager. I would do this because of...
-
Eerhayes replied to the thread 2016 CX-5 Not running after timing chain job.Please keep us informed as to the fix. Thanks Ed
-
Eerhayes replied to the thread Buying out my 2022 CX-5 lease, what maintenance will I need to do?.The owners manual is a good first read.
-
Eerhayes replied to the thread How sealed is the transmission? 2020 CX-5.Where in MAZDA'S literature do they say it is a "LIFETIME, FLUID?
-
Eerhayes replied to the thread 2017 CX-5 Squealing Noise - Turning Left Only (Right Side Front Wheel Area).+1 Red B. Pull the noisy wheel and check for rocks or a bent dusk cover. ED
-
Eerhayes replied to the thread Which oil is best for the 2.5L Non-Turbo CX-5?.I am using Mobil 1 EP and have an excellent UOA. I therefor will continue to use it at a 5,000 miles recommended change interval based...
-
Eerhayes replied to the thread Oil pan bolt stripped threads.I have seen dealers at Ford actually use an impact wrench to tighten oil pan drain bolts. You can find JERKS at every level at every...
-
Eerhayes replied to the thread Mazda CX-5 2024 GS Interior Rattles.Check the overhead sunglass holder.
-
Eerhayes replied to the thread Need help diagnosing noise from Engine (2013 CX-5).There is a sensor that detects cylinder detonation and retards the timing when needed. I would check that. Ed
-
Eerhayes replied to the thread Manual Mode Issues?.Manual mode won't shift into a gear that will cause over-reving the engine.
-
Loading…
-
Loading…
-
Loading…
