Chip/Reflash Question

MPC12347

Member
:
Mazda Speed3
Is there a chip or a flash that will get rid of the power limitations? like our boost being limited in the 1st 2 gears?
 
i heard there was a way to turn the boost limit off. but i wouldn't suggest it unless you have a strong motor mount id rather grip then spin. but its something like hold the dsc for 3 seconds turn the car on then hold it again for 3 seconds and watch all ur lights blink on then off i just saw this in a thread one time i actually havent tried it.
 
i heard there was a way to turn the boost limit off. but i wouldn't suggest it unless you have a strong motor mount id rather grip then spin. but its something like hold the dsc for 3 seconds turn the car on then hold it again for 3 seconds and watch all ur lights blink on then off i just saw this in a thread one time i actually havent tried it.

I think that method only turns off DSC and traction control, you will see the DSC and traction lights on after you do that but I'm not sure if it removes the 1-2 boost limiter.
 
The standback doesn't remove the limiter, but it does make 1st and 2nd gear noticeably stronger. I don't know if it boosts higher or just comes on quicker, but I can tell a difference between switching the stock map and the CPE altered one.
 
Is there a chip or a flash that will get rid of the power limitations? like our boost being limited in the 1st 2 gears?

did u just ask this without (google)?

there ap/piasini flash/cpe flash...they all can raise or remove boost limited in 1st and 2nd...
 
Why do you want to remove the limit anyway...more power is useless...it all wheel spin!!! (burnout)

If you want to remove the limit, just install a MBC!!
 
yea seriously, have fun in 1st and 2nd....

sping bog bog spin bog bog spinnnnnn....and traction...woohoo
 
Back