anyone wanna give me a map?

[RuZec]

It has been a while since I have been on the boards. But I was wondering if someone would have a map for their COBB AP that has the same setup as me that Icould get. I know not all cars are the same and what not but my car is knocking ridiculous numbers and I am stuck where there is no place near by to tune. And I will not be able to get my car tuned until I bring my car back to california before I head to Korea. or if anyone could recommend me some other idea that would be swell.. thanks ahead.

 

[COBB Tuning]

Where are you seeing knock? Do you have any logs of what your knock counts are? We have several protuners in the bay area and that might be a good first place to look. You can also download AccessTUNER Race and start looking at starting a MAF calibration for your intake. I would almost go back to the stock intake for the time being and see if that helps.

 

[RuZec]

I will see knock when I am just cruising or when I am WOT. I have been away from the car scene for quite a bit now. Where can I find a article or something to read about MAF calibration on where it should be or how it should be and what to look for.

 

[COBB Tuning]

Check out our tuning guides on our forum at www.cobbforums.com. All cars will report knock at cruise. It is how they operate as they try to maintain mean best torque (MBT) but at these load levels, it is nothing to worry about. At WOT, that is another story, but again, it depends on how much knock. Do you have logs? How are you monitoring knock?

 

[RuZec]

I dont have any logs right now. I am using my COBB AP to monitor it. I have seen my knock levels hit as high as 5 if I can remember but I know it is a fairly high number when I am WOT.