aem fic help

[Boosted_Speed]

so youve got the jumper harness in and your stock fuel injectors and still no start.

Its not a problem with the AEM then.

Start looking into why you dont have either A - Fuel, or B - Spark.

i have fuel and i have spark but the car jus gets the spark and it goes away

 

[tommy793]

Still not the F/IC unless you wired something to the ignition coil wires from the ecu.

and how do you mean it just "goes away" like you crank the engine and the first couple cranks it fires then it just stops?

 

[Crazee D]

I was just considering, if the unit is miswired, it may not properly bypass with the jumper harness installed.

I agree that it sounds like a timing issue too. Keep looking.

Definitely call AEM tech support.

 

[tommy793]

AEM tech support wont be able to do anything for him if the car wont even start bypassed.

Its either wired very wrong, or he did something wrong on his rebuild. I would suggest wiring everything back up to stock, get rid of all the AEM F/IC wiring and just start over from scratch on the diagnostics.

 

[Boosted_Speed]

Still not the F/IC unless you wired something to the ignition coil wires from the ecu.

and how do you mean it just "goes away" like you crank the engine and the first couple cranks it fires then it just stops?

yup becouse i tested spark and it jus gets spark the first couple seconds then it goes away

 

[tommy793]

So when you going to rewire it back to stock?