104 MPH @ 13.16 seconds

nice run :)

i need to get a clutch and drag radials now
 
Last edited:
wow nice...very nice. were you on Pump gas or race gas @ 12 psi?

Those dont look like drag radials to me. They look like steeelies...that Protege is rice...j/k

Can we expect more later? maybe 12s? (gossip)
 
Last edited:
g-Force T/A<sup></sup> Drag Radials 225/50/15
Sunoco Ultra 94 pump gas
Boost was set to 13 PSI for the day
12's will be difficult with the weight of the car 2930lbs with driver measured after the last race.


spacemonkey said:
wow nice...very nice. were you on Pump gas or race gas @ 12 psi?

Those dont look like drag radials to me. They look like steeelies...that Protege is rice...j/k

Can we expect more later? maybe 12s? (gossip)
 
xsivspd said:
g-Force T/A<SUP></SUP> Drag Radials 225/50/15
Sunoco Ultra 94 pump gas
Boost was set to 13 PSI for the day
12's will be difficult with the weight of the car 2930lbs with driver measured after the last race.
thats what u got the boost knob for :)
 
******* nice job man, vid isn't loading for me right now, so I'll check back ina while(prolly too much traffic right now or something). But nice job man
 
what you need to do is get your ass down to jersey, and drive the MPI MSP(Dean's) becuase with your driving in THAT car I bet we get 12s
 
WTF? 1.9s 60' times? I never see better than a 2.3!!! HOW DO YOU DO IT?

Do you get rub with those radials?
 
Kooldino said:
WTF? 1.9s 60' times? I never see better than a 2.3!!! HOW DO YOU DO IT?

Do you get rub with those radials?

im sure that light flywheel and act clutch help alot.
 
mattybo said:
im sure that light flywheel and act clutch help alot.
Not really. Half the guys who run at the track have those mods. Including myself.
 
Everything was working and hooking up well at the track for the day.
The only issue I encountered was with -very- slight rubbing of the bottom of the strut tower when the tire grew on the burn out.
If I had choosen the smaller tire offered in the 15inch, hooking up for the 60' would have caused slower times.
And we don't want that do we? ;) (burnout)
 
Back