Current Engine bay pics everyone

[biknman]

is there a way to buy that rear drum-to disc conversion system?

Yup to buy mine one off custom set up. I currently know of nobody offering a a rear drum to disc conversion for the 3 gen Protege 4 lug.
I'm offering for sale everything need bolted up to the spindle ready to go. All that is required by buyer would be bolt up the struts, TTLs, Training Arms attach brake lines and bleed the emergency brake cable to it handle assembly.

FYI if you where to buy and since you'll be unbolting the TTL and trailing arms might as well buy my custom (AWR) adjustable upgraded setup at the same time and bot it all up for one hell of a rear suspension braking package. I also have the GT Spec rear link reinforcement panel and V brace http://corksport.com/store/category/4qc0/99p-suspension_misc.html along with AWR 22mm adjustable AWR sway bar with end links.
Hell for that matter also get my AWR custom valved (set up for autocross and track with 99 1.6 Pro Cross weights) Beilstein struts Eibach springs coil overs with front Ground Control camber caster plates and rear AWR camber plates making everything a spherical bearing pavement eating monster of a rear end.

I

I also have a set of AWR Cnc'd caliper brackets for drum to disc 4 lug conversion for sale but you'll have to obtain the calipers and rotors from AWR.
http://www.awrracing.com/pages/pro/prosusp.html

 

[nk2a]

how much was that BOV?

between - $200 - $250 - $70 for the electronics to run it with a MAF.

 

[bazooka joe]

you selling the coilovers?

 

[biknman]

Yes I am. I PM'd you. Everything is for sale and it's all first come first serve at my asking price.

you selling the coilovers?

 

[Wojtek]

sweet rides people! congrads

 

[mazdaspeed777]

This is my candy store what would you like?

Click link in my sig below for tons more pictures most recent toward end of album

You selling any endlinks? If so how much? I need front and back for a P5?? Are those AWR endlinks you have there?

 

[Omar MSP]

I need a favor guys, i just want to see how some of u have your BPV ports closed (if you have a relocation kit) & (what u used to close them)

i'm doing my car this sunday and i just want to be more confident. even though it may not be a big of a deal. rather be safe than sorry.

Thx!

 

[CnoTataymo]

Mines plugged with a rubber nipple and I put a hose clamp.

 

[Omar MSP]

Mines plugged with a rubber nipple and I put a hose clamp.

alright, i can go to a hardware store and get one right?

 

[CnoTataymo]

Yeah, or to Pep Boys.

 

[Arnhem]

is there a way to buy that rear drum-to disc conversion system?

Ehm we have 4-lug disc-ed BJ 323/protegs here. Some 1.6 and most 1.8 engines have it. OEM EDM.

@ biknman: those wilwood's are just sick !
If only I lived closer i'd sure pick up some parts

 

[D-rock240]

I live in MD I could probably hold some small parts for you for a while if you are seriously interested.

Too bad I'm swapping to 5 lug shortly. Can't wait to get the MSP rims on

 

[mazda_pro5_2nr]

what are your plans vic?

No matter what he does to it....its always sexy. It sucks being poor.....And then you talk to sponsorships and they "Oh Columbus, OH, sure we..." "No its Columbus, GA" "Oh.....um.....we'll call ya"

..........fuckers.............

 

[Arnhem]

Hah thanks Derrek,

Interesting. However I won't be meeting you for a while haha. A very long while. Or are you coming over to Europe this time? ghehe.

Well if biknman could send me a list of parts with a price i'd sure be interested.

I live in MD I could probably hold some small parts for you for a while if you are seriously interested.

Too bad I'm swapping to 5 lug shortly. Can't wait to get the MSP rims on

 

[biknman]

I am the front are for sale $35 plus S&H but the rears are part of the rear 22mm AWR sway bar I have for sale $100.00 plus S&H.

You selling any endlinks? If so how much? I need front and back for a P5?? Are those AWR endlinks you have there?

 

[Salmon_Rob]

21.5 mm awr bar they dont make a 22

 

[biknman]

3Gen 1.6T Race Car Part Out

21.5 mm awr bar they dont make a 22

Everything I have from AWR was specially designed and or engineered (tweaked a little) for my program nothing I have for sale can be currently bought off AWR website store. Thanks for noticing if your interested I can cut you a really good deal. I'm asking half price for what the items (or simulor items) are listed for on the AWR or Corksport websites plus shipping. For more pictures click link in my signature at end of album is pictures of everything for sale. PM me if your interested.

 

[djarkitek]

holy crapp!

 

[jeg0024]

I thought this was the "engine bay pics" thread?

 

[Dimitrios]

What strut bar is that? Brand/make?