ms64meplease
Member
- :
- 06 ms6
i did my greddy timer so i will make i easy for others it wasnt bad since i have the know how but really there not super hard im just making it easy so you dont need to test all the wire to find out what is what
1) remove the panel on the bottom of the steering comum theres 3 screws 1 back towards the middle and 2 silver 1 under the tilt the other is very noticable. remover the area around the key hole it wont break easy so dont be affraid to be aggresive, then remove the bottom half it should pop appart preety easy.
**note-its alot easier to do all this with the tilt all the way up and the seat back for more room
2) the wires most use are 1 a keyed, 2 acc wire, 3 12v wire and the ground so heres the wires you need
a.black/yellow-- 12v
b. black/white-- acc
c. blue---------key/on
3) how to obtain these wires! theres a row of wires electrical taped to the colum. cut the tape and get it out of your way all the wires you are looking for are the bigger of the wires so its not that bad the ground wire i attacked to a bolt by taking the nut off the steering colum area and tghtened it back up
4) now the fun part set the times functions to where you want it after a fast test put it all back together again and make sure that black screw goes back in the spot it came from yeah i learned that fast....lol have fun guys hope this helps if you need speed sensor etc i know where those are also this is just a basic guideline
jay
1) remove the panel on the bottom of the steering comum theres 3 screws 1 back towards the middle and 2 silver 1 under the tilt the other is very noticable. remover the area around the key hole it wont break easy so dont be affraid to be aggresive, then remove the bottom half it should pop appart preety easy.
**note-its alot easier to do all this with the tilt all the way up and the seat back for more room
2) the wires most use are 1 a keyed, 2 acc wire, 3 12v wire and the ground so heres the wires you need
a.black/yellow-- 12v
b. black/white-- acc
c. blue---------key/on
3) how to obtain these wires! theres a row of wires electrical taped to the colum. cut the tape and get it out of your way all the wires you are looking for are the bigger of the wires so its not that bad the ground wire i attacked to a bolt by taking the nut off the steering colum area and tghtened it back up
4) now the fun part set the times functions to where you want it after a fast test put it all back together again and make sure that black screw goes back in the spot it came from yeah i learned that fast....lol have fun guys hope this helps
if you need speed sensor etc i know where those are also this is just a basic guidelinejay
