What have you done to your MSP today?

that would be such a pain in the ass to make any changes to the settings lol....the stupid seat belt assembly covers most of the top of the coilover. pain in the ass...
 
evilmonkeyMSP said:
that would be such a pain in the ass to make any changes to the settings lol....the stupid seat belt assembly covers most of the top of the coilover. pain in the ass...
Click to expand...

well i adjusted my suspension once, then reinstalled the rear pieces. Not that much extra work IMO but i like having the choice if i wanted to use the plates instead of factory bolts.
 
You could probably talk to someone at AAC, I know they have the plates and have tried them in several different setups. How popular YS have become I'm sure they have tried it or would like to try it. Couldn't hurt
 
lmao, it's still in the box. I opened it, that's about it. Im not feeling too good today so I haven't done much of anything at all. The day after I installed the Haltech, I started feeling bad and its gradually been getting worse and the plan was to take the mani/turbo/DP off the day before the turbo got here so all I have to do is install everything but I haven't even done that yet.

Well, decided I wasn't going to let this bug I got stop me from installing the GT30. So I took out the manifold, t25 and downpipe and swapped everything over to the GT30. Went to mount everything back up and of course nothing ever goes as planned when working on a MSP. WGA hits the hard line that goes across the front of the block preventing the manifold from sitting flush against the head
 
Last edited:
Plasti dipped my rh's white today

71qmao.jpg
[/IMG]
 
GT30 is mounted, all that's left is hooking up the oil feed, down pipe back on the exhaust, and adding coolant to the car. Then, tuning time!!
 
lol, yeah slowly making progress. But now I can't get the oil feed line to screw on to the turbo for some reason. Don't know why. The oil feed port on the turbo is the same size as the stock turbo. I'll probably mess around with it again tomorrow. Im not feeling good at all and this sickness is just getting worse and worse.
 
I have a consistent knocking noise coming from inside the trans, I must've damaged something. My plan is to find a good trans for as cheap as possible and swap it to keep the car on the road then rebuild my original trans and reinstall it.
 
Spiced MSP said:
lol, yeah slowly making progress. But now I can't get the oil feed line to screw on to the turbo for some reason. Don't know why. The oil feed port on the turbo is the same size as the stock turbo. I'll probably mess around with it again tomorrow. Im not feeling good at all and this sickness is just getting worse and worse.
Click to expand...

Whatever sickness you have, you gave me :( I didnt install the haltech as planned.. I did put in the 565s though. Its running hella rich on the stock ecu. Perfect afr at 20psi though!
 
getting close to cranking time on the MSP. Almost done with the install. By the way, for anyone that may be looking for a downpipe in the near future, I feel sorry for you. CS has officially taken the downpipe off of their site and from what I hear, they only have one left as one was recently bought. Looks like the curse of the dying platform has struck again. So, for those wanting a downpipe, you guys better push the CR3 group buy. Let's get those things rolling.

checked and rechecked everything and started the car and it runs. Idle is a little bit bouncy, but it's only by like 100-200rpm so Im going to mess around map in a bit to see what's going on
 
Last edited:
Spiced MSP said:
getting close to cranking time on the MSP. Almost done with the install. By the way, for anyone that may be looking for a downpipe in the near future, I feel sorry for you. CS has officially taken the downpipe off of their site and from what I hear, they only have one left as one was recently bought. Looks like the curse of the dying platform has struck again. So, for those wanting a downpipe, you guys better push the CR3 group buy. Let's get those things rolling.

checked and rechecked everything and started the car and it runs. Idle is a little bit bouncy, but it's only by like 100-200rpm so Im going to mess around map in a bit to see what's going on
Click to expand...

And then share the goods?

I really want to get my hands on a cs 3" exhaust before they stop making that too. Ugh.
 
Please log in or register to reply here.

New Posts and Comments

B
    • Like
  • Question Question
2025 CX-5 USB-C Flash Drive Compatibility
2
Replies
25
Views
708
Busch
B
M
Rear wiper inserts KR9P-67-333 is torn - under shield is hanging loose!
Replies
7
Views
384
ms2000
M
S
No rear speakers. Aftermarket speaker recommendations?
Replies
3
Views
337
Muzz 04
M
Z
    • Like
Itching to customize my 2013 Mazda5
2
Replies
35
Views
687
zoomies100
Z
K
Best Tires for 2021 CX-5 Turbo?
Replies
12
Views
369
N7turbo
N7turbo
G
  • Question Question
2013~2016 Door Hinge lube -- what is everyone using and recommending?
Replies
0
Views
62
GFrosty
G
View more…

New Threads and Articles

Back