What have you done to your MSP today?

[msp03.5]

yesterday i ordered some goodies for my speed.

Unichip, su hotpipe, millenia pcv, su billet rear motor mount. i already have the su billet front motor mount. I was going to get a samco hotpipe but they are backordered for months and i got a deal on the hardpipe.

nice I have been debating on getting the su billet mounts How do you like them?

 

[69RMSP]

im still debating between awr and su because I dont wany my cs downpipe 2 crack

nice I have been debating on getting the su billet mounts How do you like them?

 

[CitizenPro]

^ u better get something quick.

 

[Velocifero]

im still debating between awr and su because I dont wany my cs downpipe 2 crack

did I sell you mine? Yeah you better get something on it for protection. I could tell that the new one you got was better than the original one I got, but I still would run it safe.

 

[Rush]

I restrained the VERY strong urge to put my foot through my passenger side headlight, when that HID decided to take a s*** and stop working.

Does that count for anything?

 

[Omar MSP]

nice I have been debating on getting the su billet mounts How do you like them?

i have the front one installed, i had an AWR before. they snapped in two.

the rear is on its way and installing this weekend. but the front is amazing, the engine stays very still. i'm getting the rear to eliminate my wheelhop.

 

[MSP608]

I restrained the VERY strong urge to put my foot through my passenger side headlight, when that HID decided to take a s*** and stop working.

Does that count for anything?

hope you didnt buy from xenon-shop. unless you plan to buy another kit youll never see pretty lights again.

 

[CitizenPro]

i have the front one installed, i had an AWR before. they snapped in two.

the rear is on its way and installing this weekend. but the front is amazing, the engine stays very still. i'm getting the rear to eliminate my wheelhop.

The front is bound to crack if the rear isnt installed.....as u can see Its basically the only force trying to hold it from moving. Get that rear installed asap mang.....it seems people shy away from it, when it just takes some time and patience to install. A buddy and i knocked it out in under an hour with some air tools.

 

[Omar MSP]

The front is bound to crack if the rear isnt installed.....as u can see Its basically the only force trying to hold it from moving. Get that rear installed asap mang.....it seems people shy away from it, when it just takes some time and patience to install. A buddy and i knocked it out in under an hour with some air tools.

me and my cousin are going to do it this sunday. i'm heard its a bish, but i'll get it done.

 

[CitizenPro]

me and my cousin are going to do it this sunday. i'm heard its a bish, but i'll get it done.

yes it is. Once u get past the harness, its cake. And some advice if you gonna use an impact wrench.....u can remove the side bolt without removing the driver side wheel. Just peek through your driver side wheel and u can see your bolt grab some extensions and zip it out real quick through your wheel, it'll save ya some time. And of course, extensions thorough the top for the top bolts and they'll fly right out too.

 

[Omar MSP]

yes it is. Once u get past the harness, its cake. And some advice if you gonna use an impact wrench.....u can remove the side bolt without removing the driver side wheel. Just peek through your driver side wheel and u can see your bolt grab some extensions and zip it out real quick through your wheel, it'll save ya some time. And of course, extensions thorough the top for the top bolts and they'll fly right out too.

i don't have access to air tools. i'm old fashion, i'll get it done though.

 

[69RMSP]

The downpipe isnt installed yet..

I'll defanilty have motor mounts before i put the dp in. I would prefer the su mounts because they are a less duro but I don't know if they are stiff enough to prevent the downpipe from cracking

^ u better get something quick.

 

[69RMSP]

uhhh I can't remember but I think so...

new one? are we talking about the downpipe? if so why do you say that?

did I sell you mine? Yeah you better get something on it for protection. I could tell that the new one you got was better than the original one I got, but I still would run it safe.

 

[Velocifero]

uhhh I can't remember but I think so...

new one? are we talking about the downpipe? if so why do you say that?

I am one of the people that had their spipes shear in half even with filled mounts, and flex pipe, it was replaced under warranty from CS but I went another direction with the exhaust so decided not to go through the trouble of reinstalling it. I was just saying that the quality of the second pipe they sent was awsome compared to the first one I had, so if you have my newer one it should be good, but I still would want the mounts as safety.

 

[69RMSP]

Yeah... I plan on having full motor mounts, I have a flex pipe and im going to get someone to fab me up something to hold the turbo mani in place...

Wasnt someone making a tranny mount or something?

Do you think the SU MM will save my DP?

I am one of the people that had their spipes shear in half even with filled mounts, and flex pipe, it was replaced under warranty from CS but I went another direction with the exhaust so decided not to go through the trouble of reinstalling it. I was just saying that the quality of the second pipe they sent was awsome compared to the first one I had, so if you have my newer one it should be good, but I still would want the mounts as safety.

 

[MSP608]

what did i do today? pulled 9psi to redline without hitting fuel cut!! first time in months, but sad that my car performs better in warmer weather.

 

[I_Vtec]

I resisted the urge to kick it when it ran poorly!

 

[Buca]

Nice, now only if it works..LOL

 

[MaxSpeedFreak]

Today i got my MP3 rims ready to be painted
tomorow ill paint them dark gold
ill post pics when im done =)

 

[Omar MSP]

^^^ nice man, can't wait to see the results.