boost2dms6
Member
This is normal for me, $45-47 dollars. I run it til the tank is bone dry before I fill up.
What have you done to your Mazda6 today?
- Thread starter Antoine
- Start date
This is normal for me, $45-47 dollars. I run it til the tank is bone dry before I fill up.
$60-65 for me... $1.18/L
had an oil change done thursday, they found a leaking seal somewhere in the rear end.. i wasnt paying much attention after they said it'd be covered under my MAP warranty haha i think it was one of the axle seals
last night rolled over 95,000KM... jay, hows that canadian 100k badge comming? haha
glad to have you back boosted!
It is just an accent. They are white LEDs strips. Here is a pic with the fogs on.
I do have blue LEDs inside the dome lights.
And red LEDs in the cup holders.
I did fill up my tank today=$45.02. I almost wish for my gas sipping Honda until I have to drive through the snow.
Looks good man; I like those Cup holder LEDs!
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
thanks.
it is a tight fit in the garage though.
thing is 13'' longer than the 5. lol
it is a tight fit in the garage though.
thing is 13'' longer than the 5. lol
SMOKEYS36SHOP
Member
- :
- 2007 Mazdaspeed 6
i did this mod around june of last year ...here is the info on it ..my friend gave them to me for working on his car...thought of a nice clean place to put them and they have been working great for 8 months ..i love the look of them...they are waterproof and come with a 3m tape on the back...wired them into the side markers ...very easy simple job...took about 20 minutes..then posted the work on another forum i am a part of and a few people like funkster put their own spin to it
http://www.autozone.com/autozone/ac..._/N-25pw?counter=32&itemIdentifier=60064_0_0_
here is what it looks like in pitch dark
Hey Boosted, welcome back!!Good colour choice too.
Taylor, are you trying to sell to a woman just to get more activity in your lady-drivers thread? Either way, good luck with her, I hope she likes it.
lol. She still wants to come and see it saturday.
Last edited:
Rockin03mp5
Member
- :
- '13 Mazda3 / '13 Edge / Your Mom
well, i just moved some crap somewhere else.
Funkster777
Member
- :
- Mazdaspeed 6
Had pads and rotors installed today. Cost me $145.31. They did it in less than 2 hours. I followed the break-in procedure after I picked up the car.
- :
- MazdaSpeed 6
Guys,
I have not been honest about what i have bought or where i live or what has gone on this past year or so. The shop was a bad investment that went south and didn't turn out the way i wanted, so instead of answering to everyone about it i just decided to make things up and leave this place. That was not the best way to handle things, i should've been honest from the start. I still have the Speed, the black one #2717, and while it sits in the garage during the winter, its still for the most part how it was when i left here. I never sold it, never bought an IS-F, never moved to GA, although i did visit my uncle who lives there and looked at a few houses. I'm looking into buying another one, but that's just it ( looking). I would love to get a WWP for 2nd car and would love to use that for a build. I have gotten Married, and me and my wife have a wonderful baby boy now. I still live in RI, although in Warwick. I apologize for my actions and for making you all believe i left this great community. There are lots of new and exciting products coming to this market and I'm helping out a few companies as i type this. I hope you all can forgive me and the way i have acted over the past year or so.
I have not been honest about what i have bought or where i live or what has gone on this past year or so. The shop was a bad investment that went south and didn't turn out the way i wanted, so instead of answering to everyone about it i just decided to make things up and leave this place. That was not the best way to handle things, i should've been honest from the start. I still have the Speed, the black one #2717, and while it sits in the garage during the winter, its still for the most part how it was when i left here. I never sold it, never bought an IS-F, never moved to GA, although i did visit my uncle who lives there and looked at a few houses. I'm looking into buying another one, but that's just it ( looking). I would love to get a WWP for 2nd car and would love to use that for a build. I have gotten Married, and me and my wife have a wonderful baby boy now. I still live in RI, although in Warwick. I apologize for my actions and for making you all believe i left this great community. There are lots of new and exciting products coming to this market and I'm helping out a few companies as i type this. I hope you all can forgive me and the way i have acted over the past year or so.
G
Guest20182
Interesting. I don't know why you felt you had to lie about that stuff to people you don't know and people who don't expect anything from you. I kind figured their was no way you bought a shop, sold it, moved, bought a house, 60k+ car and bought a new speed. But whatever man, I don't disrespect you, I'm just confused why you'd lie to the internet LOL. I don't know what you told people that you no longer wanted them to know though. That said, glad to have you back.
Last edited:
- :
- MazdaSpeed 6
you would love that, i wish you left some parts on it. but ill consider it!
in all seriousness if someone comes along with an offer this weekend on it, let em have it..- :
- 2006 VRM Mazdaspeed6 GT, 1983 RX-7 GSL
I ain't mad at you, man. Heck, I'm glad that you're still (kinda) in my neck of the woods. I still plan on coming down to you when I'm looking for a custom AP tune. (thumb)
Mazel tov on the wife and the new little one!
-Jay
Mazel tov on the wife and the new little one!
-Jay
- :
- MazdaSpeed 6
I can do that for ya!, do you have an AP currently?
Shoot me a PM if you do, if i can find some spare time later this week ill make ya one. Oh yeah and included your mods list in the PM
ms6zoomzoom
Member
- :
- 06 Mazdaspeed 6. Black Mica.
Soooo I did this last weekend. Car feels ******* amazing. Ridiculous fast. Intake setup is temporary until my buddy can get more materials in to build me a better one.
ms6zoomzoom
Member
- :
- 06 Mazdaspeed 6. Black Mica.
Soooo I did this last weekend. Car feels ******* amazing. Ridiculous fast. Intake setup is temporary until my buddy can get more materials in to build me a better one.
Turbo is a Garrett GT3076 .82 A/R mounted on a SteedSpeed top mount mani. Car runs pretty smooth. Tuned w/ Cobb AP. Running 20psi right now. Intake is the only thing limiting me right now.
Turbo is a Garrett GT3076 .82 A/R mounted on a SteedSpeed top mount mani. Car runs pretty smooth. Tuned w/ Cobb AP. Running 20psi right now. Intake is the only thing limiting me right now.
Last edited:
- :
- MazdaSpeed 6
Well that looks yummy! Get some of this http://www.jegs.com/i/JEGS/555/32062/10002/-1?CT=999 for the Downpipe. SteedSpeed has come along way with their manifolds, their s*** is top notch now. Any plans to go with a Blow thru MAF setup instead of Draw Thru?
Last edited:
