TEIN coilover on P5

[MIT]

1. Does anyone using TEIN SS coilover or TEIN basic coilover on P5?
2. Is it good in handling? I am thinking to get the basic one because of $$$.
3. Will it fit properly on P5 without any modification? Simple swap?
4. Does it work with the stock sway bars? No $$$ to change it at once.

 

[FC3s Boy]

the SS will gie you 16 way adj. where as the basic is only height adj.. it will bolt right in and works with the sway bars the SS will run you about $1200

 

[I_Vtec]

Talk to Rogue Pro5, he has the SS version and is very happy.

 

[L8R]

ull get a stiffer ride i assume and better handling u can pm dakinep5. he has the ss.

 

[Brian MP5T]

Holy Crap, The SS is a great suspension. Un-real. Have a look at the attachment... Do not install this piece, it will click and break off. Untill it does, every bump you hit will make a noise..

 

[MIT]

How much for the basic version?

the SS will gie you 16 way adj. where as the basic is only height adj.. it will bolt right in and works with the sway bars the SS will run you about $1200

 

[L8R]

i was told about $1000 shipped to hawaii new, but again, shipping to hawaii is very high. so i would assume $900 for you?

peace

 

[MIT]

No one has tried the TEIN coilover basic version? Please help.

 

[Brian MP5T]

Basic are s***. You cant adjust.

 

[Brian MP5T]

3. Will it fit properly on P5 without any modification? Simple swap?

No you require an Air Gun...

 

[Rogue]

if you're gonna git the TEINs, get the SS. Also, save up some more and get the AWR rear sway bar.

like Brian says, you'll need Impact tools and an extra set of hands.

you will have to remove the brake caliper to install the rear left assembly.

 

[Brian MP5T]

Worth every second of the install. The Car is like glue on the road..

 

[Rogue]

Worth every second of the install. The Car is like glue on the road..

(werd)

 

[Dexter]

Why do you need impact tools?

 

[Brian MP5T]

You have to assemble the kit...

The Upper mount is re-used from the stock setup...

 

[MIT]

Isn't it come with top mount? Have to use the stock top mount?

You have to assemble the kit...
The Upper mount is re-used from the stock setup...

 

[Brian MP5T]

It has the alumininum piece you see in the picture, but it uses the top part of the Stock Suspension. You have to get JIC-FLT-A2 to get Camber Plates. Good Luck $$$

 

[bonesmp5]

A1s have the plates too

 

[nate0123]

we sell tein at good pricing let us know if you want to order.
www.autorage.net
770.461.9449

you are not an Authorized Vendor

pm Antoine about this if you want to promote your website (cool)