yah my brother has a fully build h22 civic that made 520 to the wheels on race gas. its his street car though so he has it at 15 psi for now and only makin about 430. wich is still to much, lol.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
running 20psi on msp
- Thread starter neysha_eddie
- Start date
- Status
- Not open for further replies.
yah my brother has a fully build h22 civic that made 520 to the wheels on race gas. its his street car though so he has it at 15 psi for now and only makin about 430. wich is still to much, lol.
i came on looking for a perrin fuel rail so i dont have to make one.. but that resulted in Fail... but made a new msp buddy.. sad part mods probly lock this give me infrag... and delete..
(btw i tryed and edit all the name calling..prev posts)
good luck, i found one for 100 buck about a year ago and have only seen 2 since. it was one guy who had a few.
blazinrola80
Member
- :
- msp 03
lol exactly... man bet he has money in that h22 did he go f bottom end or sleved the h.. manly rods and i think only one for h22 is mahle that make a good piston for the H.. on hondas i use AFI turbo kits.. make life easy..
im going to do a full power pass on dyno see how much peak then second program street pump 450 for msp.... and yes rx8 will be gone and buddy club sus. and bbk installed...
im going to do a full power pass on dyno see how much peak then second program street pump 450 for msp.... and yes rx8 will be gone and buddy club sus. and bbk installed...
blazinrola80
Member
- :
- msp 03
good luck, i found one for 100 buck about a year ago and have only seen 2 since. it was one guy who had a few.
yea i saw thoes man they flew....
dandan2 mods please dont issue infrags. e thug got the best of us then our tuner/car enthusiust side kicked in
exactly... but i think one mod has it out for me.. (chair) im a sucker for a internet argument i usualy just do it on the honda forum they think there gods gift... ends with i bet you dont have any thing.. then i post a pic and there world crumbles.. but yea ..
this is his build list, brace urself. the previous owner built the car then my brother got it off him for 5500 bucks. lol http://www.av-engineered.com/site/projects/joshs-520whp-h22a-eg-coupe
there are some tuners who know the FSDE very, very well. sam (JDM Sam - banned) and rich (505zoom) know their way around these cars inside and out, and from what i hear kooldino keeps up damn well as well. theres not a lot of tuners for these, but theres not a lot of MSP's either. i think honda sold more civics in a day than mazda sold MSP's in the entire production run.the biggest flaw i see in these cars is tunning theres not one solid tunner.. ppl blow but they have tuned there selves i my self not a tunner i have a guy who does that .. owns a dyno ect... most motors cant hold alot of boost or else we would drive vw/ audi 4g63s or sti motors factory forged but evn thoes the ring lands will give.. so its all a matter of time..
blazinrola80
Member
- :
- msp 03
not a bad build at all... good price too.... Carrillo Super A Rods not a fan.. but yet for the price cant beat it.. he should get rid of that boost controller get a boost silinoid and go boost by gear with his s300.. lil bigger on throttle body 75 is good for him since hes 2.2 and he already has a 10 sec car..hope hes not your yunger brother he has a beast of a car..
blazinrola80
Member
- :
- msp 03
there are some tuners who know the FSDE very, very well. sam (JDM Sam - banned) and rich (505zoom) know their way around these cars inside and out, and from what i hear kooldino keeps up damn well as well. theres not a lot of tuners for these, but theres not a lot of MSP's either. i think honda sold more civics in a day than mazda sold MSP's in the entire production run.
i have no dout they are good... have experiance with this motor.. but a tunner is a tunner.. they kno how to read fuel maps.. air ect im shure most of us know basics.. read a wide band add take a way ignition timing.. ect i kno my guy is good who ever tunned miguels was good..
o at this past event hondas were the coacaroach at the event my god where there bubbles..
but ive read alot and meet quite a few ppl frrom this stie and they tell me well i tuned it on my street in 15 min.. (just common example) my motor blew these motors suck... i am a firm beliver in supporting mods also.. 20 psi isnt safe ither.. but who knows what intentions were... hope for the good...if not i (toilet)
Last edited:
blazinrola80
Member
- :
- msp 03
he already runs boost by gear. 4psi, 8, 12, 15, 15. keep in mind some changes have been made since the previous owner.
nice your bro a smart guy... any broken trannies yet?
not a bad build at all... good price too.... Carrillo Super A Rods not a fan.. but yet for the price cant beat it.. he should get rid of that boost controller get a boost silinoid and go boost by gear with his s300.. lil bigger on throttle body 75 is good for him since hes 2.2 and he already has a 10 sec car..hope hes not your yunger brother he has a beast of a car..
its my older bro. he goes through toys like no other, just sold his lq4 full bolt on with 630 duration cam(he didnt like the american mustle) so he sold it. before that he had a sc300 2jzgte powered with single turbo pushing 500 wheel.
nice your bro a smart guy... any broken trannies yet?
no, im not sure what all is done to the tranny, but i know its got quafe diff.
blazinrola80
Member
- :
- msp 03
ahh the infomus 2j... man are thoes monsters.... check this one out from my buddies down in the island : http://www.grs-motorsports.com/fotos/canoracing/salinas/1may/videos/1.wmv
TBK tuned miguels, and from what i remember reading they ripped him off by doing thing like not installing the cams they allegedly ground for him and such. ripped him off out of G's.i have no dout they are good... have experiance with this motor.. but a tunner is a tunner.. they kno how to rear fuel maps.. air ect im shure most of us know basics.. read a wide band add take a way ignition timing.. ect i kno my guy is good who ever tunned miguels was good...
as for sam, he's definitely far from a one-engine tuner. i know hes worked on numerous show cars that have magazine features... a few proteges and a few more high-profile cars (a couple supras if i recall) before he set up shop. class act too.
blazinrola80
Member
- :
- msp 03
damn we need ppl like sam back... yea i read that about miguel but the guy still made power... dont know how long it lasted but he did...
protege5407
Member
- :
- mazda, protege5
if El gato racing tunned it then that car has to be freakin beast. not only does he work with any type of mazda these guys are known for their specialty in building some of the fastest and craziest cars seen on tracks in puerto rico. last car i seen that was built and tunned by el gato racing was a 79 toyota corolla with a fully built 12A rotary engine that thing is the most amazing car i have ever seen. as for running 20 psi on stock internals that is just crazy. i know you said you wont be running it all the time just be careful when you do.
lol...I'm glad this thread has calmed down...lol...903 views...was hoping for 1000.how about this he blows ill give him my stock motor... haha i have delt with gato befor he is a standup up guy like i said he can do many amazing things... even suck in a chicken and make tenders...
- Status
- Not open for further replies.
New Posts and Comments
- Replies
- 30
- Views
- 25K
- Replies
- 16
- Views
- 9K
- Replies
- 4K
- Views
- 1M
- Replies
- 8
- Views
- 8K
