rar40941's build thread

[rar40941]

Hey guys my uncle says my frame is going to fall apart because my engine Mounts are to stiff is that true ?

 

[Dpwhitehead1]

Hey guys my uncle says my frame is going to fall apart because my engine Mounts are to stiff is that true ?

no

 

[rar40941]

That's what I thought

 

[loud3]

It's a reinforced unibody, not a frame.

Ha

 

[rar40941]

He siad my car will fall start falling apart cause my suspension is so stiff and engine mouts are so stiff. Cause I have a unibody and not a sold frame. Says I am pushing way past the limits of the car

 

[rar40941]

Hey guys got one side don and primered I hope I can get the other side son next wheel here are some pics I will post the video soon.

 

[INeedMoarLow]

Hey guys got one side don and primered I hope I can get the other side son next wheel here are some pics I will post the video soon.

that's a good start I'd just trim the bottom rear and will the gap in front be there for the final product?

 

[rar40941]

I think it there is going to be no gap cause that will bother the s*** out of my of there is a gap but I am going to make a mold so I can sell some to the protege community

 

[Circuit]

The cut actually looks pretty good, but yeah you are going to need to pull the ends out to match the wheel well.

 

[rar40941]

i was just going to leave it like that cause if i fully extend the ends it wont work in the front where the door is would have to have a bigger cut and the rear of the flare i will keep that way because when i extend the back end it covers it all and that's what most flares look like.

 

[rar40941]

oh also chris if i extend the front u wont be able to hide the door jam cut and dont be able to hide other stuff thats i am kepping it like that

 

[rar40941]

 

[INeedMoarLow]

Any updates sir? I want to see the flares!

 

[rar40941]

Ya kinda u took a video. All it was about though is cleaning up the side we did already then also starting the other side I will post it later on in the day

 

[INeedMoarLow]

I can't see your videos cause they aren't for a mobile device

 

[rar40941]

Oh sorry bro

 

[16vPete]

This will be quite badass!

 

[rar40941]

thank u

 

[rar40941]

hey guys sorry for not posting for a while here is are some videos

ok guys there are some videos i did the rear and the front fender flares. ok so lets talk about the fronts at first i cut them and made them go to high so i had to lower them so they fit better with the wheel well. also i changed all the screws to bolts yesturday and made the bumper line up better here are some pics

pic of me moving the wiring up into the top of the fender so i don't hit it when i drive.

passenger side

drivers side full pic of it

now lets talk about the rear sorry i didnt take a video i had to rush for blox that i was in

here is a pic of how much i cut into the rear and i cocked to seal the hole

the front of the back flare

the back of the back flare

and a pic from stancenation cause i guess one of there photographer liked my car

 

[rar40941]