New turbo kit available for Protege!

[xenon929]

So Creative Performance just put out a new kit and I thought I'd share it with you guys and see what you all think... FS 2.0

This kit is a compromise between Hp and reliability, but the most important thing, is Quality!
These are the parts:
1- T3/t4 Precision turbo, ball bearing choice available for $300 extra charge
2- Tial waste gate 38mm
3- Ceramic coated turbo header with option of silver or black
4- Ceramic coated down pipe with connected dump pipe
5- 400 hp rated intercooler
6- sequential blow off
7- mandrel bended presure pipes 2.5 inch
8- 3 inch intake with air filter
9- silicone tube joints with clamps
10-Steel braided oil feed line and return line w AN fittings
11 Inline fuel pump (Walbro)
12-Fuel management unit (FMU)
13-thermostat housing adapter
14- All necessary bolts, fittings and hoses
15- Relay and wires for fuel pump
16- Upgrades available

http://www.youtube.com/watch?v=ltI4DNx1Bng
http://www.youtube.com/watch?v=Q04fRp6mKPs&feature=related(bow)

 

[mx-p5]

So, this is a complete kit? What's it run cost wise? And, does it have the option for the intake to be an SRI rather than CAI down in the wheelwell?

 

[shane02pro5]

Looks like a very good quality kit but I saw his other thread was closed co hopefully he is applying for AV status!

 

[xenon929]

I'm not Creative I'm a forum member bringing something to everyones attn. So I don't need to apply for AV. However, he probably will be. I enquired about it to Antoine, passed the info along and I'm sure he will be doing so soon.

These guys do any kind of custom fab work so I'm sure you can get any intake you want. As for the price I think is in the $4500 range.

 

[03silverproto]

<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/ltI4DNx1Bng&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/ltI4DNx1Bng&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

heres a link to thier video on youtube

 

[xenon929]

bump...

 

[mx-p5]

$4500? Wow, I think I'll stick to the MSP setup for about $1000. Thanks for the info though!!

 

[CantCMe]

I'm not Creative I'm a forum member bringing something to everyones attn. So I don't need to apply for AV. However, he probably will be. I enquired about it to Antoine, passed the info along and I'm sure he will be doing so soon.

These guys do any kind of custom fab work so I'm sure you can get any intake you want. As for the price I think is in the $4500 range.

Looks bad as hell!!! Nice pics...now I have more ideas.

 

[CantCMe]

$4500? Wow, I think I'll stick to the MSP setup for about $1000. Thanks for the info though!!

Yeah, $4.5k is alot...but it looks like it's well put together.

 

[shane02pro5]

That's what makes it hard these days with everyone doing MSP set-ups for under $1k as long as you can be happy with the power...but by the time you upgrade everything to handle more power you will be spending this much or more!

This looks like an amazing set-up and needs to be drawing more attention!

I guess it's a bit different when the people are buying proteges these days for nearly $5k it's hard to justify that kind of money!

 

[shane02pro5]

My P5 the way it sits right now cost me nearly as much as a new GT-R!

 

[mx-p5]

That's what makes it hard these days with everyone doing MSP set-ups for under $1k as long as you can be happy with the power...but by the time you upgrade everything to handle more power you will be spending this much or more!

This looks like an amazing set-up and needs to be drawing more attention!

I guess it's a bit different when the people are buying proteges these days for nearly $5k it's hard to justify that kind of money!

Oh, I whole heartedly agree with you! If I wanted to make bigger HP numbers, i'd def. be intrested in this kit! It looks very well put together, but, for someone just wanting a little more oomph out of his 2.0, stock MSP kit is for me.

But to all the guys like you, this is a good setup, just gotta build the motor to match the boost this kit can put out

 

[crashkelly]

it's makes just enough power to more than likely send a rod through your block so you have the pleasure of spending 4500 bucks then another 3 grand on internals and engine prep...Nice kit, just sucks that we have toothpick rods...

 

[Viralphrame]

My P5 the way it sits right now cost me nearly as much as a new GT-R!

i'm sure you'd have more fun in your p5 than you would a GT-R. built not bought, right? much more satisfying to see something you've done with your own hands succeeed

it's makes just enough power to more than likely send a rod through your block so you have the pleasure of spending 4500 bucks then another 3 grand on internals and engine prep...Nice kit, just sucks that we have toothpick rods...

speedcircuit and these guys should get together and set new FS-DE records hehe

next time i have $10k laying around, we'll see........ hehe

 

[shane02pro5]

Yes that power is definately pushing the limits!

 

[shane02pro5]

Have a few kids and you'll get a big fat $5k+ income tax check once a year!

 

[A louie]

I just want the mani, dump tube, and thermostat housing

 

[mazdaspeedwerx]

4500 thats alot of money. what turbo is that t3/t4

 

[CantCMe]

Yeah, wish we had better stock internals...

 

[StealthWyvern]

nice hi-boost couplers!