New speaker wire into the doors?

[kielly]

I did a search and got way too many results about running the speaker wire to the doors. What is the best way for the front doors? Back doors where easy but the front doors suck. Any suggestions. Should I just drill it out or what?
Here are some picts so far of my Rattle trap Extreme Matting that I have put down. Thanks for the help guys.

PS
GO DUCKS.... Yes went to Oregon.

 

[tweety2300]

Havnt had the door panel off it yet but one way to do it is pull the panel off run a metal clothes hanger through the rubber boot that carries the rest of the wires tape the speaker wire to it real good and pull it through. Or you could tie a knot in a section of the stock speaker wire and pull it through that way hope this helps

 

[MasonMetcalfe]

wo

 

[bfowler]

Havnt had the door panel off it yet but one way to do it is pull the panel off run a metal clothes hanger through the rubber boot that carries the rest of the wires tape the speaker wire to it real good and pull it through. Or you could tie a knot in a section of the stock speaker wire and pull it through that way hope this helps

lol, yeah...you havnt had the door off then ]

there is a molex plug that wont allow a coat hanger, or feeding wire straight though

 

[tweety2300]

Well that sucks I was hoping it would be easy for when I do it. I may be doing this sometime soon I have a speaker that keeps coming in and out, when I have time to figure out which one it is if its a front door speaker then ill let you know how to get it...btw I feel dumb for asking but what's a molex plug?

 

[bfowler]

kielly made 2 threads about it, i put some pics in this one:

http://www.mazdas247.com/forum/showthread.php?123789442-New-speaker-wire-into-the-doors

 

[kielly]

Just looked at the picts, thanks.

 

[R-X-R]

i want to know how the road noise level is compared to stock.

 

[kielly]

It helped considerably. I am going to go back though and add another layer of load based foam to the floor to deaden the muffler sound.